Integrity Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

RX4640 Boot Fails

 
RonMarch
Occasional Contributor

RX4640 Boot Fails

Tring to bring up an rx4640 after a power fail and getting the following error below:

 

Loading.: EFI Shell [Built-in]
3 0 0x000312 0x0000000000000000 EFI detected invalid value when validating SysMode

Error verifying password.  Status=Device Error.  Press any key...

 

 

Hints anyone .....

 

PS: This server was migrated from a company that was acquired and not sure what state it was in prior to error.

4 REPLIES 4
Torsten.
Acclaimed Contributor

Re: RX4640 Boot Fails

Did you see this message before?

Try:

EFI> sysmode service

EFI> sysset

 

EFI> sysmode admin

and post.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
RonMarch
Occasional Contributor

Re: RX4640 Boot Fails

In process of upgrading firmware to latest revision, noticed there were a lot of bug fixes in the firmware, will get the info to you shortly.

RonMarch
Occasional Contributor

Re: RX4640 Boot Fails

Firmware upgrade resolved the issue.  Thanks for your help.

Stephan.
Honored Contributor

Re: RX4640 Boot Fails

You might want to mark the thread or the answer that helped as solved and give Thorsten one ore several Kudo's for his help.

 

See my signature for more information about Kudos.