Integrity Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

RX4640 SNMP trap and community setting on MP

 
SOLVED
Go to solution
Jason Lee3
Frequent Advisor

RX4640 SNMP trap and community setting on MP

Hi,

I can't see where I set the SNMP trap destination and community string on the MP on an RX4640. I have set the host OS level SNMP settings no problem but want to provide hardware level trapping. Within "CM" - "ID" - I can set the snmp contact details and server information but that's all. Any ideas?

Thanks for any assistance.

Jason
3 REPLIES 3
Sameer_Nirmal
Honored Contributor
Solution

Re: RX4640 SNMP trap and community setting on MP

Jason Lee3
Frequent Advisor

Re: RX4640 SNMP trap and community setting on MP

Thanks for the info on the MP FW, that might explain it (We are only running E.03.15).
Is the SNMP config performed at the CM level or via a browser to the MP?

Regards

Jason
Sameer_Nirmal
Honored Contributor

Re: RX4640 SNMP trap and community setting on MP

SNMP configuration could be done via

MP -> CM -> SNMP
http://docs.hp.com/en/5971-4289/ch07s02.html

as well as

Web Graphical Interface as mentioned at
http://docs.hp.com/en/5971-4289/ch06s04.html#d0e5332