HPE Community
Integrity Servers
1753797 Members
7203 Online
108799 Solutions
New Discussion юеВ

Re: RX6600 - How Identify internal disk???

 
SOLVED
Go to solution
Juan de Los Palotes
Frequent Advisor

тАО05-22-2010 06:39 AM

тАО05-22-2010 06:39 AM

RX6600 - How Identify internal disk???

Hi Guys.

I have a rx6600 server, this server have 6 internal disk. I'm only using 2 of this disk, no raid configuration was made on the Internal Controller. My question is, how can I identify wich internal disk match to a hardware path, because I need to remove two Internal disk???

Thanks in advance.

JdP

0 Kudos
3 REPLIES 3
Michal Kapalka (mikap)
Honored Contributor

тАО05-22-2010 08:24 AM

тАО05-22-2010 08:24 AM

Re: RX6600 - How Identify internal disk???

hi,

check it with this command "scsimgr" , if you use LVM, or VXVM you could check wich disk are used and all other are not used.

mikap
0 Kudos
Torsten.
Acclaimed Contributor

тАО05-22-2010 12:03 PM

тАО05-22-2010 12:03 PM

Solution

Re: RX6600 - How Identify internal disk???

Just do

# sasmgr get _info -D /dev/sasd0 -q raid

if sasd0 is your controller.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Juan de Los Palotes
Frequent Advisor

тАО05-22-2010 07:04 PM

тАО05-22-2010 07:04 PM

Re: RX6600 - How Identify internal disk???



sasmgr get_info -D /dev/sasd1 -q lun=all

sasmgr get_info -D /dev/sasd0 -q lun=all -q lun_locate

0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.