HPE Community
Integrity Servers
1753349 Members
5003 Online
108792 Solutions
New Discussion юеВ

Re: RX7640 Add 1 Cell

 
Basheer_2
Trusted Contributor

тАО12-06-2010 11:20 PM

тАО12-06-2010 11:20 PM

RX7640 Add 1 Cell

Hello,
We have RX7640 Server with 1 Cell configured.

What parts are needed to install a second cell. (nPar)

I think we need these RX7640 Parts
1) 1 Cell Board with CPU and RAM
2) MP Core IO Card
3) 2 NIC Cards
4) 2 HBAs
5) 2 Hard Disks

Is this corrct?

does this change if we go for vPar.
0 Kudos
Reply
2 REPLIES 2
Torsten.
Acclaimed Contributor

тАО12-06-2010 11:42 PM

тАО12-06-2010 11:42 PM

Re: RX7640 Add 1 Cell

You need a cell with CPU and RAM, right.

If you want to add the cell to the nPar, you don't really need another MP, but better to have one (more I/O resources).

Each vPar needs some HBAs (network, etc) and own boot disks.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
cnb
Honored Contributor

тАО12-07-2010 08:45 AM

тАО12-07-2010 08:45 AM

Re: RX7640 Add 1 Cell

Some other resources that might help for hardware requirements for all of the supported Operating Systems:

nPar Admin Guide:
http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c01868281/c01868281.pdf

Other Partition (nPar & vPar) Guides:
http://h20000.www2.hp.com/bizsupport/TechSupport/Product.jsp?lang=en&cc=us&taskId=101&prodClassId=10008&contentType=SupportManual&docIndexId=64255&prodTypeId=18964&prodCatId=3368276&prodSubCatId=3368286


Rgds,
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.