Integrity Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

Reallocate memory between npars

 
SOLVED
Go to solution
George_Dodds
Honored Contributor

Reallocate memory between npars

Hi

 

Is it  possible to reallocate memory from one npar to another on a sx1000?

 

Source npar hosts vpars and dest npar is a vmhost.

 

Ta

 

George

 

2 REPLIES 2
Torsten.
Acclaimed Contributor

Re: Reallocate memory between npars

Yes and no.

 

It does not work like on a vPar, you need to assign a cell together with all the memory on it to a nPar.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Holger G
HPE Pro
Solution

Re: Reallocate memory between npars

Hi George,

 

no, it is not possible to reallocate memory between two different npars (hard partitions).
The memory is installed on the cell boards, which are assigned to one specific npar.
You could of course change the npar (hard partition) configurations (remove / add cells), but that has to be offline.

If you change npar configurations, remember the rules for best performance / memory interleaving.

 

See also QuickSpecs (assuming you have a sx1000 Superdome):
http://h18000.www1.hp.com/products/quickspecs/11717_div/11717_div.HTML
-> Superdome Configuration Guidelines/Rules

 

 

Kind Regards

Holger

I am an HP employee.
Was this post useful? - You may click the KUDOS! Star.

- I work for Hewlett Packard Enterprise -