Integrity Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

Rebuild Rate : 20.00 %

 
DPVamsi
Occasional Contributor

Rebuild Rate : 20.00 %

Hi,
In #sasmgr out put. The "Rebuild Rate" for root disk shows 0% and for secondary it shows 20%. What does that mean.

Is it that the Rebuild Rate is always 0% for Root disk.

the Out put below,

# sasmgr get_info -D /dev/sasd0 -q raid

Tue Mar 24 11:43:03 2009

---------- PHYSICAL DRIVES ----------
LUN dsf SAS Address Enclosure Bay Size(MB)

/dev/rdsk/c2t0d0 0x5000c5000c9ccd41 1 3 140014

---------- LOGICAL DRIVE 4 ----------

Raid Level : RAID 1
Volume sas address : 0x9a291f868aa2e40
Device Special File : /dev/rdsk/c2t5d0
Raid State : OPTIMAL
Raid Status Flag : ENABLED
Raid Size : 139000
Rebuild Rate : 20.00 %
Rebuild Progress : 100.00 %

Participating Physical Drive(s) :

SAS Address Enc Bay Size(MB) Type State

0x5000c5000c9d8581 1 6 140014 SECONDARY ONLINE
0x5000c5000c9ccd4d 1 4 140014 PRIMARY ONLINE

---------- LOGICAL DRIVE 7 ----------

Raid Level : RAID 1
Volume sas address : 0x342606922de2351
Device Special File : /dev/rdsk/c2t4d0
Raid State : OPTIMAL
Raid Status Flag : ENABLED
Raid Size : 139898
Rebuild Rate : 0.00 %
Rebuild Progress : 100.00 %

Participating Physical Drive(s) :

SAS Address Enc Bay Size(MB) Type State

0x5000c5000c9e13a9 1 8 140014 PRIMARY ONLINE
0x5000c5000c9dab39 1 7 140014 SECONDARY ONLINE


---------- GLOBAL SPARE DRIVES ----------
SAS Address Enc Bay Size(MB) Pool State

0x5000c5000c9e232d 1 5 140014 0 ACTIVE


Regards
Vamsi
3 REPLIES 3
Torsten.
Acclaimed Contributor

Re: Rebuild Rate : 20.00 %

The default value for rebuild rate is 20%.

You can change this to other values.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
DPVamsi
Occasional Contributor

Re: Rebuild Rate : 20.00 %

Hoo okay. Thank you Torsten.

I got it. but could you let me know how to modify it? also will that make any difference?

Regards
Vamsi
Torsten.
Acclaimed Contributor

Re: Rebuild Rate : 20.00 %

It's a sasmgr command, see

man sasmgr

example:

# sasmgr [-h][-f] set_attr -D device_file -q raid -q raid_vol=rvol_id -q
rebuild_rate=rebuild_rate

It's the rebuild priority.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!