Integrity Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

Reset Admin Password on EFI Menu when BP command does not work

 
NYPR
Occasional Visitor

Reset Admin Password on EFI Menu when BP command does not work

On EFI Boot Manager in the following system
rx4640
MP FW 3.15
BMC FW 4.00
EFI FW 3.14
System FW 3.17

I can't access the "EFI-Shell", "Boot Configuration" or "System Configuration".
It asks for an Admin Password
The system came from a client and the password is unknown

The BP, BP-nc command in CM does not work.

It informs that it resets the BMC passwords also tried the RB command. Still not available.

Upon reset boot a system error 55. Failure to read system Id appears.

System is using an IA, Itanium processor
1 REPLY 1
Torsten.
Acclaimed Contributor

Re: Reset Admin Password on EFI Menu when BP command does not work

But you are able to login as admin into MP, right?

Can you attach a session log (screen dump)?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!