Reset/Login GSP COnsole Itanium server

[Frank de Vries]

We have a lot of HP Servers.
The latest addition being a Itanium server rx3600. All older HW we can access teh GSP Console by typing ctrl-B to activate the GSP interface. Works like a train.
However on the Itanium server this does not appear to work. There is a console port that I have connected, but when I do connect I get this
Authorizing session to AUDIBXUD0022...
Establishing connection...
Negotiating SSH...
SSH Session established.
Avocent CPS-810 S/W Version 3.0
Authentication Complete

Connected to Port: 7 9600,8,N,1,NONE

MP password:


MP login:

This presumably is the access to the GSP interface , right ?
Anyhow , I have no idea what the password is or was, is there a way I can reset this ? Or is there some default password for this ?

I need to get to the VFP, to check status of LEDS.

thx

[VVS]

Use the default login and password
Admin/Admin

Regards,
VVS

[Torsten.]

The GSP is now MP.

Do you connect via network with SSH?

The defaults are still Admin/Admin and Oper/Oper.

You can also access the MP/iLO via http or https.

[Ganesh Balraman]

Hi!

Try

Admin
Admin

That should work..

[Frank de Vries]

Unfortunately no joy:

login as: Admin
Admin@audibxud0022-con's password:
Access denied
Admin@audibxud0022-con's password:
Access denied
Admin@audibxud0022-con's password:
Access denied
Admin@audibxud0022-con's password:

So, anyone know a way to reset ?

[Torsten. · Accepted solution]

Connect via serial line, press and hold the MP reset button (>10sec) and confirm the reset on console. This will reset User and network settings.

[madhuchakkaravarthy]

hi

@ the back of rx box u can find the mp reset button ,,press it for a couple of minutes


then try with

Admin / Admin

regards

MC

[madhuchakkaravarthy]

hi

sorry not couple of minutes ,,, couple of secs will do or gentle press

regards

MC

[Frank de Vries]

done