Integrity Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

Rx2600 server system led umber

 
SOLVED
Go to solution

Rx2600 server system led umber

Dear all,
system led of my server blinking umber when i came here in morning. Last night, it was ok. when i am checking in event logs. There is some entries of last night. But i dont know how i can check this log is related to what?
Plz suggest where i can check these logs identification.
Thanks in advance,

Ankit
8 REPLIES 8
Torsten.
Acclaimed Contributor

Re: Rx2600 server system led umber

Post the messages here?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
HCL123
Occasional Advisor

Re: Rx2600 server system led umber

HI,
Take MP login and check power led status.
either check in /var/opt/resmon/log in event.log
sujit kumar singh
Honored Contributor

Re: Rx2600 server system led umber

hi


u can post the MP logs O/P here ,, just to see what are the alets and warning, they could be of transient nature and can go off by only acknowledging the MP logs.


to acpture the MP , logs , login to the MP as Admin / password Admin (that is the factory Default), enble logging or screen capture from the putty terminal.

u will go to the MP Main menu once u logon to MP (via Serial console or via telnet to the MP IP)

MP MAIN MENU:

CO: Console
VFP: Virtual Front Panel
CM: Command Menu
CL: Console Log
SL: Show Event Logs
HE: Main Help Menu
X: Exit Connection

give SL , E, T , L

this will show the logs in text format , u can post them here,

then will be helpful oto know about the Warnings/Alerts

Regards
Sujit

Steven E. Protter
Exalted Contributor

Re: Rx2600 server system led umber

Shalom,

It would be helpful to know which light is lit.

Logs will show nothing.

You need to connect to the console ctrl-b and show the logs of your ilo/gsp/mp card.

This will clear the amber light. Amber normally means you need to read the messages. Reading the messages will clear the light.

SEP
Steven E Protter
Owner of ISN Corporation
http://isnamerica.com
http://hpuxconsulting.com
Sponsor: http://hpux.ws
Twitter: http://twitter.com/hpuxlinux
Founder http://newdatacloud.com

Re: Rx2600 server system led umber

hi,
thanks to all for ur response. i have read the mp logs then its umber led become green. But i want to know the reason for that light. So, i am attaching the Mp logs general output like vfp, sl logs, ps, output.
Plz help me to daignose what was the problem. my system is running as usual with no problem.

Ankit
Torsten.
Acclaimed Contributor
Solution

Re: Rx2600 server system led umber

Here is your fault:

System Power state: On

Temperature : Normal





Power supplies | Fan

# State Type | States

-----------------------------------------------------------

0 Fault Type 0 | Normal

1 Normal Type 0 | Normal

power supply # 0

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
sujit kumar singh
Honored Contributor

Re: Rx2600 server system led umber

Hi,


The Amber LED has gone and that has turned as Green as u have acknowledged that by reading the logs.

However on the MP Main menu , as it seems that one of ur fans is in a Fault State, can u give the command at the MP Main menu as

MP main Menu:> CM

this will take to the MP Command Prompt, onm the command prompt give the command PS to know the power supply status and the FAN Status of the system


CM>PS

this will show the Power Supply States and also shal ltell u the Fan Status.


IF Fan also says that still this is faulty log a cse with HP to get that further analysed and replaced.


Please assign the pount s to the replies.

Regards
Sujit

Re: Rx2600 server system led umber

thanks to all of you to help in diagnose my problem.