Integrity Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

Rx2660 VGA problem

 
SOLVED
Go to solution
Vincent_5
Super Advisor

Rx2660 VGA problem

Hi guys,
Can anyone advice how to enable the VGA on rx2660 in order to see the graphics mode for hpux. I have connected the rx2660 server on a KVM switch which after changing conconfig to VGA I can c the text screen on my LCD but it does to goes to CDe . can someone advice ?

Regards
Vincent
nothing is better than to know more
2 REPLIES 2
Torsten.
Acclaimed Contributor
Solution

Re: Rx2660 VGA problem

Make sure CDE is installed and try

Check /etc/dt/config/Xservers.
If last line is commented out as follows:

# * Local local@console /usr/bin/X11/X :0

remove '# ' and restart dtlogin:

# /sbin/init.d/dtlogin.rc stop
# /sbin/init.d/dtlogin.rc start




Don't use VGA as console, because you can no longer access it via MP!

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Vincent_5
Super Advisor

Re: Rx2660 VGA problem

Hi Torsen,
Thanks for the info, I found the problem I think by default CDE env is not install. After installing it work .

Regards
Vincent
nothing is better than to know more