Rx2660 monitor smart array P400 with ACU online for OpenVMS Itanium

[Mario Giaretta]

Hello,
i have integrity server RX2660 with Smart Array P400 and i would like to configure raid volume up and running with Array Configuration Utility for OpenVMS Itanium.
Do you exists this product, or must make at EFI startup with " F8" key?

Thanks
Regards

Mario

[marsh_1 · Accepted solution]

mario,

if you have openvms already up you can use the msa utility supplied with the operating system. define a foreign command for the exe e.g

msa :== "$sys$system:msa$util.exe"

enter 'msa'

at the msa prompt enter help and all the commands you require are explained.

good luck

[Mario Giaretta]

Hi Mark,
thank you very much for info.
Mario