HPE Community
Integrity Servers
1751968 Members
4725 Online
108783 Solutions
New Discussion

Rx3600 disk drive installation - drive not visible

 
A.W.R
Frequent Advisor

‎05-10-2013 03:01 AM

‎05-10-2013 03:01 AM

Rx3600 disk drive installation - drive not visible

Hi,

 

I have an Rx3600 with HP-UX installed. It has 2 drives in bay 7 and 8. I am trying to install 2 additional drives. I installed these in bays 5 and 6. Only the drive in Bay 6 is visible and the light comes on, i.e. I cannot see the drive from the operating system. I have tried other drive bays, but with no luck.

 

Any tips on how to make the other drive visible would be appreciated?

 

Thanks

Andrew

0 Kudos
Reply
1 REPLY 1
Torsten.
Acclaimed Contributor

‎05-10-2013 04:07 AM

‎05-10-2013 04:07 AM

Re: Rx3600 disk drive installation - drive not visible

It could depend on the (RAID) controller you are using.

 

Please post this first:

 

# ioscan -fn


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.