Integrity Servers
1748235 Members
3527 Online
108759 Solutions
New Discussion юеВ

Re: Rx8640- GSP diagram

 
SOLVED
Go to solution
Popy
Regular Advisor

Rx8640- GSP diagram

Has anyone got a picture of that MP reset hardware on rx8640. I need to reset the MP and need educate my datacenter support guy what switch should be used.

Vijayy
4 REPLIES 4
Ivan Krastev
Honored Contributor

Re: Rx8640- GSP diagram

See Core I/O Leds and diagrams - http://docs.hp.com/en/AB301-9003B/ch04s02.html


regards,
ivan
TY 007
Honored Contributor
Solution

Re: Rx8640- GSP diagram

Hello,

Figure 5-7 Core I/O Card Bulkhead LEDs:
http://docs.hp.com/en/AB297-9003C/ch05s02.html#d0e13063

Thanks
TY 007
Honored Contributor

Re: Rx8640- GSP diagram

Hello,

Try to log a HP Hardware Support Ticket to check the Firmware Level if applicable

Latest HP rx8620, rx7620 and SEU Firmware:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=51400&prodNameId=346370&swEnvOID=54&swLang=13&mode=2&taskId=135&swItem=pf-47286-1

Some of the Fixes:

- The communication algorithms between the MP and the Bulk Power Supplies have been improved to increase reliability and error reporting

- Extra keystrokes before the completion of some MP commands no longer cause the MP to reset

- MP SSH function dropped connectivity when rekey was initiated from the client. A rekey no longer results in a loss of connectivity

- FW Update attempts that did not complete due to failed FTP transfers could cause the MP to hang. Failed FTP transfers no longer cause MP hangs

Thanks
tkc
Esteemed Contributor

Re: Rx8640- GSP diagram

Attached is the picture of the rx8640 core i/o you can send directly to the data center support guy. i took this picture and share this out for everyone to use.