HPE Community
Integrity Servers
1753383 Members
5817 Online
108792 Solutions
New Discussion юеВ

Re: SD2 and IOX enclosures

 
SOLVED
Go to solution
David Dilly
Regular Advisor

тАО04-12-2011 07:10 AM

тАО04-12-2011 07:10 AM

SD2 and IOX enclosures

How the IOX enclosure picks up his numbers ?


Does it depends on the wiring from the 4 crossbar modules ?

Or is there a DIP switch on IOX Backplane module.

Thanks
0 Kudos
Reply
3 REPLIES 3
Torsten.
Acclaimed Contributor

тАО04-12-2011 08:54 AM

тАО04-12-2011 08:54 AM

Solution

Re: SD2 and IOX enclosures

It's a dip switch.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Reply
David Dilly
Regular Advisor

тАО04-12-2011 11:33 PM

тАО04-12-2011 11:33 PM

Re: SD2 and IOX enclosures

Hello Torsten,

Thanks,
But what happens when i put 2 IOX enclosures with the same DIP Switch value.

Thanks.
0 Kudos
Reply
Torsten.
Acclaimed Contributor

тАО04-13-2011 03:22 AM

тАО04-13-2011 03:22 AM

Re: SD2 and IOX enclosures

Don't do this!

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.