SYSTEM_FIRMWARE_ERROR

[Fransisco Aris]

SFW *5 0xC147F31407020160 FF3F4070000F0300 SYSTEM_FIRMWARE_ERROR
02 Apr 2008 05:05:11
SFW *5 0xC147F31407020170 FF3F4070000F0300 SYSTEM_FIRMWARE_ERROR
02 Apr 2008 05:05:11
SFW 4 *7 0xF680006B04E00180 000000000000000B BOOT_UNEXPECTED_TRAP_POST_REDIR_TABLE
02 Apr 2008 05:05:11
SFW *5 0xC147F314070201C0 FF3F4070000F0300 SYSTEM_FIRMWARE_ERROR
02 Apr 2008 05:05:11

advice very welcome.thanks.

[Fransisco Aris]

PS : my box is

System firmware 1.05 [4645]
BMC version 5.06
MP version F.01.58
Installed memory 8192 MB
CPU Logical 2x1.6GHz

[George Genov]

Hi,

Can you specify the model of the server and what is the current state of the server is it running or not?

And paste a little more from the MP log.

BR

George

[Torsten. · Accepted solution]

Is this a rx2660?

A single error can produce a lot of entries in the logs - all related to the problem (more or less), but sometimes only one of them points to the problem directly.

So some more information is needed.

It could be always a good idea to contact the hp support directly.

[Torsten.]

And BTW, if this is a rx2660 there is newer firmware available:

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=3346452&swItem=ux-55780-1&prodNameId=3346456&swEnvOID=54&swLang=13&taskId=135&mode=4&idx=1

[YAQUB_1]

Hi Aris,

Ur very new member in ITRC, first I wish welcome to ITRC!!!

BTW, when U opens a new thread please pass entire information (Ex. System Model, OS version etc.)

Here is URL link:-
http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-002&h_lang=en&h_cc=us&h_product=71811&h_client=S-A-R163-1&h_page=hpcom〈=en&cc=us

I am not sure which Integrity server Ur using, please check the above link & find out Ur required system and select the OS then check the latest firmware is available there.

Thanks--Yaqub
HP Support!!!

[Fransisco Aris]

miss one thing huh!.. :), yes right this is rx2660. and then when i try unplug the HBA card this thing running well, i think this is cause by firmware of system and driver of HBA, today my box still running installation process maybe tommorow if finished i'll try to update driver and firmware then update you all about my progress.thanks.

regards,

[Torsten.]

What type of HBA?

[Fransisco Aris]

OS Hp-UX 11v2.3
HP Agilent Tachyon 1/2 GB FC (existing HBA)
HP AB378 Qlogic 4gb FC (new HBA)

here i attach progress today, still not solve yet.and when i update firmware by EFI i stuck at step
11- Proceed to "OS Independent - Updating Firmware from EFI shell", shown below.

[Fransisco Aris]

here i attach manual that i'm used for rx2660 firmware update by EFI