Integrity Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

Searver Model No Meaning

 
SOLVED
Go to solution
Highlighted
Ajin_1
Valued Contributor

Searver Model No Meaning

Dear Sir

HP Risc server starting 74XX ,84XX ,64XX and Integrity Servers are 16XX 26Xx any specific Meaning for that 74....... 16.....

Regards

Ajin
Thanks & Regards
Ajin.S
Proverbs 3:5,6 Trust in the Lord with all your heart and lean not on your own understanding; in all your ways acknowledge him, and he will make all your paths straight.
4 REPLIES 4
Ismail Azad
Esteemed Contributor

Re: Searver Model No Meaning

Hi Ajin,

rx 16xx 26xx means on the "server lineup", they are entry class servers typically processsor based systems without crossbars and cell boards

rp 74xx 84xx represents mid range servers that would be cell based systems.

Well from those two digits you will be able to know the class of the server in terms of the server lineup.

Don't forget to assign points.

Regards
Ismail Azad
Read, read and read... Then read again until you read "between the lines".....
Torsten.
Acclaimed Contributor
Solution

Re: Searver Model No Meaning

Several years ago HP introduces this naming scheme, "r" means rack optimized, "p" PA-RISC, "x" Itanium CPU, the first digit is the family, the following digits means the position in this family.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   

Re: Searver Model No Meaning

You cannot derive anything from the numbers really, except that "In general" the larger the digit in position 1, the larger the number of sockets a system supports, although even this rule is broken (a rp54xx has only 4 sockets, the same as a rp44xx), and the digit in position 2 is "4" for all HP9000 systems and "6" or higher for all Integrity systems.

So they are a pure marketing construction - pay them no mind, you are always best to go look up each model on hp.com if you are unsure of its configuration.

HTH

Duncan

Accept or Kudo
Ajin_1
Valued Contributor

Re: Searver Model No Meaning

Thanks
Thanks & Regards
Ajin.S
Proverbs 3:5,6 Trust in the Lord with all your heart and lean not on your own understanding; in all your ways acknowledge him, and he will make all your paths straight.