System Health LED - Integrity rx2660

[dheinaman]

Can anyone tell me how to clear the System Health LED light on an Integrity rx2660 running HP-UX 11.23?

Another system admin at my site unplugged one of the server's power supplies to replace a PDU in one of the server racks. EMS reported this as a power supply failure, and the System Health LED started blinking on the front of the server.

After the power supply was plugged back in, I got notification from EMS that the power supply was normal and redundancy was restored, however the System Health LED continues to blink.

Is there any way to remedy this, short of rebooting the server?

[Johnson Punniyalingam · Accepted solution]

>>>>Is there any way to remedy this, short of rebooting the server?<<<

No need for that,

gain access to rx2660 console

MP>sl (Show Event Logs) & type e (see the error logs) by doing this LED will stop blink,its kind of acknowledge

MP>HE (help)

[cnb]

In addition to the above remedy, the User Service Guide, Chapter 5 will explain in detail how to access and manage the System Event Logs:
http://bizsupport.austin.hp.com/bc/docs/support/SupportManual/c01404139/c01404139.pdf

Hope this helps.

Rgds,

[madhuchakkaravarthy]

HI

if ur not able to do so as said by johnson,, reset the mp by giving XD in MP login.. if not so other way is to reboot server.

if u find solution,close the thread.

regards

MC

[dheinaman]

Johnson's solution was correct. Thank you to everyone for your help.