Integrity Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

System Health LED - Integrity rx2660

 
SOLVED
Go to solution
dheinaman
Occasional Visitor

System Health LED - Integrity rx2660

Can anyone tell me how to clear the System Health LED light on an Integrity rx2660 running HP-UX 11.23?

Another system admin at my site unplugged one of the server's power supplies to replace a PDU in one of the server racks. EMS reported this as a power supply failure, and the System Health LED started blinking on the front of the server.

After the power supply was plugged back in, I got notification from EMS that the power supply was normal and redundancy was restored, however the System Health LED continues to blink.

Is there any way to remedy this, short of rebooting the server?
4 REPLIES 4
Johnson Punniyalingam
Honored Contributor
Solution

Re: System Health LED - Integrity rx2660

>>>>Is there any way to remedy this, short of rebooting the server?<<<

No need for that,

gain access to rx2660 console

MP>sl (Show Event Logs) & type e (see the error logs) by doing this LED will stop blink,its kind of acknowledge

MP>HE (help)
Problems are common to all, but attitude makes the difference
cnb
Honored Contributor

Re: System Health LED - Integrity rx2660


In addition to the above remedy, the User Service Guide, Chapter 5 will explain in detail how to access and manage the System Event Logs:
http://bizsupport.austin.hp.com/bc/docs/support/SupportManual/c01404139/c01404139.pdf

Hope this helps.

Rgds,

madhuchakkaravarthy
Trusted Contributor

Re: System Health LED - Integrity rx2660

HI

if ur not able to do so as said by johnson,, reset the mp by giving XD in MP login.. if not so other way is to reboot server.

if u find solution,close the thread.

regards

MC
dheinaman
Occasional Visitor

Re: System Health LED - Integrity rx2660

Johnson's solution was correct. Thank you to everyone for your help.