cancel
Showing results for 
Search instead for 
Did you mean: 

UID Led

 
haimi
Frequent Advisor

UID Led

Hi Folks,

I have a dense rack full of 10 servers.

Can anyone how can I activate the UID LED of the rx 2600? Can I activate them from the command prompt as well?

Thanks
5 REPLIES 5
Torsten.
Acclaimed Contributor

Re: UID Led

Connect to the MP and use

LOC : Locator LED display


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
haimi
Frequent Advisor

Re: UID Led

I guess this UID (Unit Indicator) is useful for server identification especially in a data center environment. But this is more useful when performing remote server identification.

Thus is there any HP-UX commands that can on/off the uid led?
Torsten.
Acclaimed Contributor

Re: UID Led

The locator LED is exactly made for this reason ... ;-)

I'm not aware of a hp-ux command, but as said above, connect (remotely) to the MP (telnet/ssh/web) and turn it on!

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Jeeshan
Honored Contributor

Re: UID Led

No, the only way to on the UID LED is like the Torsten mentioned above.
a warrior never quits
Fred Ruffet
Honored Contributor

Re: UID Led

Well, you can script a telnet session from the machine itself to its own mp. But that's only a use of Torsten answer :)
--

"Reality is just a point of view." (P. K. D.)