Integrity Servers
1748200 Members
3846 Online
108759 Solutions
New Discussion

Unable to select FS0: to boot off the CD

 
SOLVED
Go to solution
dictum9
Super Advisor

Unable to select FS0: to boot off the CD

I cannot boot off the CD, when I do map -r I get just one LUN device. I cannot select any FSx: at all. 

reconnect -r shows 11 devices

 

12 REPLIES 12
dictum9
Super Advisor

Re: Unable to select FS0: to boot off the CD

the map commands shows just one line, one LUN and does not mention DVD.  How do I map DVD?

 

dictum9
Super Advisor

Re: Unable to select FS0: to boot off the CD

reconnect -r

Broadcom NetXtreme Gigabit Ethernet (BCM5703) is detected (PCI-X)
Scsi(Pun2,Lun0) _NEC DVD_RW ND-3540A 1.30 ( 40 MBytes/sec)
Scsi(Pun5,Lun0) HP Ultrium 3-SCSI G54D ( 80 MBytes/sec)
HP 2Port 2Gb Fibre Channel Adapter (driver 1.47, firmware 3.03.154)
Broadcom NetXtreme Gigabit Ethernet (BCM5703) is detected (PCI-X)
HP 2Port 2Gb Fibre Channel Adapter (driver 1.47, firmware 3.03.154)
Broadcom NetXtreme Gigabit Ethernet (BCM5703) is detected (PCI-X)
ReconnectController(0,0,0) : Status = Success

Shell>
Shell> map -r
Device mapping table
blk0 : Acpi(HWP0002,PNP0A03,0)/Pci(2|1)/Scsi(Pun2,Lun0)

Shell>

 

dictum9
Super Advisor

Re: Unable to select FS0: to boot off the CD

Shell> bcfg boot dump
The boot option list is:
01. Acpi(HWP0002,PNP0A03,C)/Pci(1|0)/Pci(4|0)/Fibre(WWN500143801136F009,Lun4001000000000000)/HD(Part1,Sig5923D410-66FB-11E5-8000-D6217B60E588)/\EFI\HPUX\HPUX.EFI "HP-UX Primary Boot: 0/0/12/1/0/4/0.0x500143801136f009.0x4001000000000000"
02. Acpi(HWP0002,PNP0A03,E)/Pci(1|0)/Pci(4|0)/Fibre(WWN50001FE1500940AD,Lun4001000000000000)/HD(Part1,Sig2A0D3110-EF8C-11DC-8002-D6217B60E588)/\EFI\HPUX\HPUX.EFI "HP-UX Alternate Boot: 0/0/14/1/0/4/0.1.2.0.0.0.1"
03. Acpi(HWP0002,PNP0A03,0)/Pci(1|0)/Mac(0018FE2884C3) "SYS LAN 0 Cabinet 0 [Acpi(HWP0002,PNP0A03,0)/Pci(1|0)/Mac(0018FE2884C3)]"
04. Acpi(HWP0002,PNP0A03,100)/Pci(1|0)/Mac(0018FE2884BF) "SYS LAN 1 Cabinet 0 [Acpi(HWP0002,PNP0A03,100)/Pci(1|0)/Mac(0018FE2884BF)]"
05. VenHw(D65A6B8C-71E5-4DF0-A909-F0D2992B5AA9) "EFI Shell [Built-in]"
06. Acpi(HWP0002,PNP0A03,100)/Pci(2|1)/Scsi(Pun2,Lun0) "Lower DVD" OPT
Shell> i(HWP0002,PNP0A03,100)/Pci(2|1)/Scsi(Pun2,Lun0) "Upper DVD" OPT
08. Acpi(HWP0002,PNP0A03,0)/Pci(3|1)/Scsi(Pun5,Lun0) "edwboot"
09. Acpi(HWP0002,PNP0A03,10E)/Pci(1|0)/Pci(4|0)/Fibre(WWN500143801136F00C,Lun4002000000000000)/HD(Part1,Sig425F5CB8-774E-11E1-8000-D6217B60E588)/\EFI\HPUX\HPUX.EFI "HP-UX HA Alternate Boot: 1/0/14/1/0/4/0.0x500143801136f00c.0x4002000000000000"
0A. Acpi(HWP0002,PNP0A03,0)/Pci(3|1)/Scsi(Pun5,Lun0) "edwbootoptinon"
0B. Acpi(HWP0002,PNP0A03,0)/Pci(2|1)/Scsi(Pun2,Lun0) "boot" OPT

Torsten.
Acclaimed Contributor

Re: Unable to select FS0: to boot off the CD

The drive itself is detected, so it could be a problem with the media.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
dictum9
Super Advisor

Re: Unable to select FS0: to boot off the CD

I am not even getting to the point where I boot off the CD.  It's not mapped. How do you map it?

 

Torsten.
Acclaimed Contributor

Re: Unable to select FS0: to boot off the CD

if there is a valid media in the drive, do "reconnect -r" and "map -r".


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
dictum9
Super Advisor

Re: Unable to select FS0: to boot off the CD

When I try to map it, I get this:

 

Shell> bcfg boot add 0B "file.efi" "DVD"
bcfg: File file.efi - No mapping

dictum9
Super Advisor

Re: Unable to select FS0: to boot off the CD

Okay, I am getting somewhere. I put in the CD to another drive and got this. Looks encouraging.  Now what command do I issue to boot off the CD?

 

Broadcom NetXtreme Gigabit Ethernet (BCM5703) is detected (PCI-X)
Scsi(Pun2,Lun0) _NEC DVD_RW ND-3540A 1.30 ( 40 MBytes/sec)
Scsi(Pun5,Lun0) HP Ultrium 3-SCSI G54D ( 80 MBytes/sec)
HP 2Port 2Gb Fibre Channel Adapter (driver 1.47, firmware 3.03.154)
Broadcom NetXtreme Gigabit Ethernet (BCM5703) is detected (PCI-X)
HP 2Port 2Gb Fibre Channel Adapter (driver 1.47, firmware 3.03.154)
Broadcom NetXtreme Gigabit Ethernet (BCM5703) is detected (PCI-X)
ReconnectController(0,0,0) : Status = Success

Shell> map -r
Device mapping table
fs0 : Acpi(HWP0002,PNP0A03,0)/Pci(2|1)/Scsi(Pun2,Lun0)/CDROM(Entry0)
blk0 : Acpi(HWP0002,PNP0A03,0)/Pci(2|1)/Scsi(Pun2,Lun0)
blk1 : Acpi(HWP0002,PNP0A03,0)/Pci(2|1)/Scsi(Pun2,Lun0)/CDROM(Entry0)
blk2 : Acpi(HWP0002,PNP0A03,0)/Pci(2|1)/Scsi(Pun2,Lun0)/CDROM(Entry1)

Shell> fs0:

fs0:\> cd efi

fs0:\EFI> ls
Directory of: fs0:\EFI

 

Robert_Jewell
Honored Contributor
Solution

Re: Unable to select FS0: to boot off the CD

The output of the CDROM image doesnt look complete.  Here is an example of what you should see:

fs2:\> ls
Directory of: fs2:\

  06/17/11  02:26a <DIR>          1,024  EFI
  06/17/11  02:26a              698,868  INSTALL.EFI
  06/17/11  02:26a                   16  AUTO
  06/17/11  02:26a                  243  STARTUP.NSH
          3 File(s)     699,127 bytes
          1 Dir(s)

fs2:\> ls efi
Directory of: fs2:\efi

  06/17/11  02:26a <DIR>          1,024  .
  06/17/11  02:26a <DIR>              0  ..
  06/17/11  02:26a <DIR>          1,024  BOOT
  06/17/11  02:26a <DIR>          1,024  Intel_Firmware
  06/17/11  02:26a <DIR>          1,024  HP
          0 File(s)           0 bytes
          5 Dir(s)

Your installation disc doesnt appear to be correct or its corrupt.

To answer your question: from the fsX: location of the CD/DVD, you can run the command "install" to start the installation of HP-UX.

 

-Bob

----------------
Was this helpful? Like this post by giving me a thumbs up below!