Integrity Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

Unix Partition in not turning ON

 
pierre10452
Advisor

Unix Partition in not turning ON

hi All,

i have an intigrity rx7620 with two partitions, cell 0 is for unix and cell 1 is for windows.

today i turned the server on but the cell 0 is not running, cell 1 in running normally

i tried to turn it many times but the partition is always OFF.

please need help

Thx
4 REPLIES 4
Torsten.
Acclaimed Contributor

Re: Unix Partition in not turning ON

First you can connect to the MP and check the status of the cell using "ps".

If a failure is deteced, you should contact HP support and let them have a look into the MP logs.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
pierre10452
Advisor

Re: Unix Partition in not turning ON

thx a lot, i will check the output of this command and come back to you ASAP.

Thx again
Asif Sharif
Honored Contributor

Re: Unix Partition in not turning ON

Hi pierre,

1. Did you turned off the the cabinet or partitions?

2. What is LED status in front of server?

as suggusted by torsten pls. send the output for further analysis, besides that see the below mentioned service guide for HP Integrity rx7620 Server.

http://docs.hp.com/en/A7027-96036/index.html

Regards,
Asif Sharif

Regards,
Asif Sharif
pierre10452
Advisor

Re: Unix Partition in not turning ON

hi Asef and Torsten,

thanks a lot for ur reply, the client is not under contract till the moment so i will wait my manager to tell me when i can begin the diagnostics.

i have turned off the cabinet but same problem and led of cell 0 is on but the cell is OFF.

i will reply to your advices when i begin the diagnistics.

thanks again