Upgrading EFI Firmware?

[Jayson Hurd_2]

Turns out our 'new' rx4640 needs an EFI firmware upgrade to work with our KVM switch and Linux. However, when I go to HP's site, the EFI Firmware is not listed there as a possible download. What do I need to get this firmware and how do I perform the upgrade? Any help would be greatly appreciated.
Thanks.

[Stefan Stechemesser]

Hi,

the EFI Firmware does not come as a single image but only bundled with PAL, SAL and BMC Firmware.
You can downloadload the Firmware (either EFI Executable or iso image) from www.hp.com ("rx4640 System and BMC firmware"):

http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?pnameOID=346361&swEnvOID=54&submit.y=3&submit.x=7&taskId=135&cc=us&locale=en_US&prodTypeId=15351&prodSeriesId=346359

best regards

Stefan