HPE Community
Integrity Servers
1752519 Members
5067 Online
108788 Solutions
New Discussion юеВ

Re: WARNING [42]

 
The Brit
Honored Contributor

тАО06-23-2008 07:39 AM

тАО06-23-2008 07:39 AM

WARNING [42]

When I power up or reset my rx3600 I get the following message.

WARNING [42] CPU's with different core frequencies installed.

This is a 2 processor (4-core) system, running OpenVMS 8.3. Processor 1 (CPU/Core's 0/1) has speed 1.418 GHz, and Processor 2 had speed 1.398 GHz.

Is this anything I should be concerned about, (either the warning message, or the mixed frequencies)??

Dave.
0 Kudos
3 REPLIES 3
Torsten.
Acclaimed Contributor

тАО06-23-2008 07:43 AM

тАО06-23-2008 07:43 AM

Re: WARNING [42]

Please go to the EFI shell and run

Shell> info all

Post the result.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
The Brit
Honored Contributor

тАО06-23-2008 08:37 AM

тАО06-23-2008 08:37 AM

Re: WARNING [42]

Attached.

Dave
0 Kudos
The Brit
Honored Contributor

тАО03-25-2009 07:43 AM

тАО03-25-2009 07:43 AM

Re: WARNING [42]

System actually had mismatched cpu's
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.