Integrity Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

WEB console access on rx2600

 
SeaMark_1
Frequent Advisor

WEB console access on rx2600

Now I can telnet the MP card but when I access the MP's ip address, it return some mussy codes.

I found EL'help like this "The MP can be set to allow telnet access, web access or both."

I don't understand.
I could have configured the MP's ip and enabled it's access permission,thoughout,
I can't see useful thing from IE.

When typing SR in MP command line, see this:
=====================
Firmware revision report

MP FW : E.02.07
BMC FW : 01.50
EFI FW : 01.22
System FW : 02.01
======================

Its version is too lower?
I have no idea and can not find helpful document.

Anyone can do me a favor??

All the best.

Leo
He must cherish the hope that one day he will be amply rewarded.
9 REPLIES 9
Ivajlo Yanakiev
Respected Contributor

Re: WEB console access on rx2600

If you want to use remoute connection ot the MP you first need enable Remoute access using null modem cable.

Ivajlo Yanakiev
Respected Contributor

Re: WEB console access on rx2600

You can allow only telnet or WEB or WEB/telnet.

SeaMark_1
Frequent Advisor

Re: WEB console access on rx2600

You mean this ??
+++++++++++++++++
LAN port access options:
[A] All access enabled - both Telnet and Web
[D] Disable LAN port - prevent Telnet and Web access
[T] Telnet only enabled
[W] Web only enabled

Please indicate the new mode for the LAN port,
or to retain current value. Choose one of (A, D, T, W): a
a
New LAN port access settings will be: All enabled

Confirm? (Y/[N]): y
y


Current LAN port access: All enabled

+++++++++++++

But it can help.
He must cherish the hope that one day he will be amply rewarded.
SeaMark_1
Frequent Advisor

Re: WEB console access on rx2600

This have no use.
The problem still exists.
He must cherish the hope that one day he will be amply rewarded.
mits
Respected Contributor

Re: WEB console access on rx2600

Firstly, your MP firmware is old. Current MP firmware revision is E.02.29. You can update it with HP-UX MP firmware patch PHSS_30679(11.22) or PHSS_30680. If your OS is Linux or Windows, you can download the other type of MP firmware E.02.29 on the web below.

http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?pnameOID=88839&locale=en_US&taskId=135&prodTypeId=15351&prodSeriesId=447335&swEnvOID=54#2734

As for the troubleshooting, I would suggest you will ping your MP IP lan port first to see if it responds correctly. Secondly, you also can access the MP LAN console with the telnet. It appears you are using the IE browser for access like http://xx.xxx.xxx.xxx. Try telnet://xx.xxx.xxx.xxx and you can telnet in to the MP LAN console. Also you may need to update the IE version. My IE is 6.0 and it works with no problem.

Lastly, if the telnet does not work correctly, try to use the cross over LAN cable and connect your PC to the MP LAN port directly, then access the MP LAN. If you have configured the MP LAN IP and have it enabled, it should work. In this case, it is better you chnage the gateway address of the MP LAN port to your MP LAN IP address temporariry for test.

Note: If you connect the MP LAN port to some switch, it may cause your problem and MP LAN speed may not be negotiated correctly. In this case, update yoyr MP firmware to E.02.29 first, then set the switch lan port speed to 10Mbps/fix. A few switch may not be able to negotiate the lan speed with the MP LAN port correctly.

Hope this help.
SeaMark_1
Frequent Advisor

Re: WEB console access on rx2600

Many thanks.
Look this.
--------------------------------------------
MP> ls
LS
LAN configuration:
. MAC Address : 0x00306e39eda7
. IP address : 210.76.128.38
. MP Host Name : xkbqd06mp
. Subnet mask : 255.255.255.0
. Gateway address : 210.76.128.2
. Link state : Auto Negotiate
. Web Console Port Number : 2023

LAN status: UP and RUNNING
MP Host Name: xkbqd06mp
---------------------------------------------

In fact, I can telnet this MP card, only web access is not availble.

Ought I to change the port to 80? or change â Link stateâ
He must cherish the hope that one day he will be amply rewarded.
mits
Respected Contributor

Re: WEB console access on rx2600

I would suggest you first update the MP firmware to E.02.29 and check to see if it can prevent your web console problem. My MP configuration uses the MP console port 2023 and it works with IE 6.0 with no problem. OR if you can use the Netscape, try it too.
SeaMark_1
Frequent Advisor

Re: WEB console access on rx2600

Hi,
Thanks a lot.

Firstly, Sorry for give you so less points, which dismatch help given to me, since this my second post in the forum and I don't konw how to distribute points. :-)

Following your advice, I consulted HP engineer and he suggest not upgrading my MP'firewre, besides he can't answer my question compellently.

I know old MP card need a little facility, WEB console box, to implement web access.

Do I need this box?

"MP E 02.29" upgrading notice say, I need to upgrade to 02.10 and next 02.26.

I can't find "MP E 02.10" & "MP E 02.26" in

http://www1.itrc.hp.com/service/patch/search.do?BC=patch.breadcrumb.main|&pageContextName=firmware:

What should I do?
He must cherish the hope that one day he will be amply rewarded.
SeaMark_1
Frequent Advisor

Re: WEB console access on rx2600

:-)
He must cherish the hope that one day he will be amply rewarded.