Integrity Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

Warning Integrity 4640

 

Warning Integrity 4640

Hi, i have a server hp integrity 4640, this equipment is alarmed. it has a color LED to ambar in the frontal part.

In the console is the following screen:




# Location|Alert| Encoded Field | Data Field | Keyword / Timestamp
-------------------------------------------------------------------------------
431 MP 0 2 0x4B000A7B00E03010 010000004340F23B MP_SOFT_RESET
430 BMC *3 0x204340F23B023000 4B1F647000100300 Type-02 107004 1077252
03 Oct 2005 08:56:27
429 MP 0 2 0x4E800A7B00E02FF0 0B0010FF00000000 MP_SOFT_RESET
428 MP 0 2 0x5E800A7A00E02FD0 0000000000000004 MP_SELFTEST_RESULT
03 Oct 2005 08:56:27
427 MP 0 2 0x4E800A7B00E02FB0 0B0010FF00000000 MP_SOFT_RESET
03 Oct 2005 08:39:05
426 MP 0 2 0x5E800A7A00E02F90 0000000000000004 MP_SELFTEST_RESULT
03 Oct 2005 08:39:05
425 BMC 2 0x20433F1615022F80 FFFF0103FDC00300 Type-02 c00301 12583681
01 Oct 2005 23:04:53
424 BMC 2 0x20433F14A1022F70 FFFF0103FDC00300 Type-02 c00301 12583681
01 Oct 2005 22:58:41
423 BMC 2 0x20433E4F0C022F60 FFFF0103FDC00300 Type-02 c00301 12583681
01 Oct 2005 08:55:40
422 MP 0 2 0x4E800A7B00E02F40 0B0010FF00000000 MP_SOFT_RESET
30 Sep 2005 10:34:09





Apparently single are alarms of level 2 and 3; nevertheless, it wanted to know to that these events talk about and so that they appear so foolowed.

When clean logs of the console of the equipment warning of the LED takes off.



Thanks
2 REPLIES 2
mits
Respected Contributor

Re: Warning Integrity 4640

I would suggest you will check the MP logs with the Text mode when/if you need to know more about the entries. Here is one example that logs identical entry. It says "System event log almost full".

Alert Level 3: Warning
Keyword: Type-02 107004 1077252
System event log almost full
Logged by: Baseboard Management Controller;
Sensor: Event Logging Disabled
Data2: PRV State: 0x1FOEM Code2: 0x4B
0x204144FDFB023000 4B1F647000100300

You can check the MP SEL capacity by using the SL command before you clear the logs. It has the data "% Full" of SEL.
Prashant (I am Back)
Honored Contributor

Re: Warning Integrity 4640

Hi,

Yes that is good option to go through logs alternate is to check the logs is possible

REfer to doc
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c00269122

Regards,
Prashant S.
Nothing is impossible