bootable device name for tape in EFI

[stephen peng]

guys,
what would be the bootable device name for tape in EFI, see the following map output, would that be a tape or not?
fs0 [0;37;40m : Acpi(HWP0002,PNP0A03,400)/Pci(1|0)/Sas(Addr5000C500063A7DB9,Lun0)/HD(Part1,SigBD840238-F1F6-11DF-8002-D6217B60E588)
fs1 [0;37;40m : Acpi(HWP0002,PNP0A03,400)/Pci(1|0)/Sas(Addr5000CCA00A914DD9,Lun0)/HD(Part1,Sig76612470-F2F6-11DF-8002-D6217B60E588)
blk0 [0;37;40m : Acpi(HWP0002,PNP0A03,0)/Pci(2|1)/Usb(0, 0)
blk1 [0;37;40m : Acpi(HWP0002,PNP0A03,400)/Pci(1|0)/Sas(Addr5000C500063A7DB9,Lun0)
blk2 [0;37;40m : Acpi(HWP0002,PNP0A03,400)/Pci(1|0)/Sas(Addr5000C500063A7DB9,Lun0)/HD(Part1,SigBD840238-F1F6-11DF-8002-D6217B60E588)
blk3 [0;37;40m : Acpi(HWP0002,PNP0A03,400)/Pci(1|0)/Sas(Addr5000C500063A7DB9,Lun0)/HD(Part2,SigBD840256-F1F6-11DF-8003-D6217B60E588)
blk4 [0;37;40m : Acpi(HWP0002,PNP0A03,400)/Pci(1|0)/Sas(Addr5000C500063A7DB9,Lun0)/HD(Part3,SigBD840274-F1F6-11DF-8004-D6217B60E588)
blk5 [0;37;40m : Acpi(HWP0002,PNP0A03,400)/Pci(1|0)/Sas(Addr5000C500063A3745,Lun0)
blk6 [0;37;40m : Acpi(HWP0002,PNP0A03,400)/Pci(1|0)/Sas(Addr5000C500171D4175,Lun0)
blk7 [0;37;40m : Acpi(HWP0002,PNP0A03,400)/Pci(1|0)/Sas(Addr5000CCA00A914DD9,Lun0)
blk8 [0;37;40m : Acpi(HWP0002,PNP0A03,400)/Pci(1|0)/Sas(Addr5000CCA00A914DD9,Lun0)/HD(Part1,Sig76612470-F2F6-11DF-8002-D6217B60E588)
blk9 [0;37;40m : Acpi(HWP0002,PNP0A03,400)/Pci(1|0)/Sas(Addr5000CCA00A914DD9,Lun0)/HD(Part2,Sig766124A2-F2F6-11DF-8003-D6217B60E588)
blkA [0;37;40m : Acpi(HWP0002,PNP0A03,400)/Pci(1|0)/Sas(Addr5000CCA00A914DD9,Lun0)/HD(Part3,Sig766124C0-F2F6-11DF-8004-D6217B60E588)
I could not recognize it.
before map, following messages told that there was tape on this system:
HP 1Port 4Gb Fibre Channel Adapter (driver 1.05, firmware 4.00.070)
Scsi(Pun1,Lun0) HP C7438A ZP6B

regards
Stephen

[DeafFrog]

Hi ,

From Shell > prompt , type reconnect -r , and note the Pun and Lun number for the tape device.If the same Pun and Lun number appears in the above o/p , you will have your answer.

Regards,

[Jayakrishnan G Naik · Accepted solution]

Hi Stephen

I have searched some hp documents and got some info which may help you to do this.

The command reconnect -r may help you to identify your tape device

Attaching the doc that may help you here.

Thanks & Regards
Jayakrishnan G Naik

[Jayakrishnan G Naik]

Hi Stephen,

Forgot to add the document in previous reply.
Adding it here.

Thanks & Regards
Jayakrishnan G Naik

[Wim Rombauts]

At least, in the device list you show, there is no tape drive.

I only see 2 harddisks with an EFI partition.
Your device list is :
- a USB device
- 2 partitioned disks (boot disks I presume)
- 2 nonpartitioned disks.

[stephen peng]

I think JGN's reply offer enough messages for me to continue.

regards
Stephen