Integrity Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

bootable device name for tape in EFI

 
SOLVED
Go to solution
stephen peng
Valued Contributor

bootable device name for tape in EFI

guys,
what would be the bootable device name for tape in EFI, see the following map output, would that be a tape or not?
fs0 [0;37;40m : Acpi(HWP0002,PNP0A03,400)/Pci(1|0)/Sas(Addr5000C500063A7DB9,Lun0)/HD(Part1,SigBD840238-F1F6-11DF-8002-D6217B60E588)
fs1 [0;37;40m : Acpi(HWP0002,PNP0A03,400)/Pci(1|0)/Sas(Addr5000CCA00A914DD9,Lun0)/HD(Part1,Sig76612470-F2F6-11DF-8002-D6217B60E588)
blk0 [0;37;40m : Acpi(HWP0002,PNP0A03,0)/Pci(2|1)/Usb(0, 0)
blk1 [0;37;40m : Acpi(HWP0002,PNP0A03,400)/Pci(1|0)/Sas(Addr5000C500063A7DB9,Lun0)
blk2 [0;37;40m : Acpi(HWP0002,PNP0A03,400)/Pci(1|0)/Sas(Addr5000C500063A7DB9,Lun0)/HD(Part1,SigBD840238-F1F6-11DF-8002-D6217B60E588)
blk3 [0;37;40m : Acpi(HWP0002,PNP0A03,400)/Pci(1|0)/Sas(Addr5000C500063A7DB9,Lun0)/HD(Part2,SigBD840256-F1F6-11DF-8003-D6217B60E588)
blk4 [0;37;40m : Acpi(HWP0002,PNP0A03,400)/Pci(1|0)/Sas(Addr5000C500063A7DB9,Lun0)/HD(Part3,SigBD840274-F1F6-11DF-8004-D6217B60E588)
blk5 [0;37;40m : Acpi(HWP0002,PNP0A03,400)/Pci(1|0)/Sas(Addr5000C500063A3745,Lun0)
blk6 [0;37;40m : Acpi(HWP0002,PNP0A03,400)/Pci(1|0)/Sas(Addr5000C500171D4175,Lun0)
blk7 [0;37;40m : Acpi(HWP0002,PNP0A03,400)/Pci(1|0)/Sas(Addr5000CCA00A914DD9,Lun0)
blk8 [0;37;40m : Acpi(HWP0002,PNP0A03,400)/Pci(1|0)/Sas(Addr5000CCA00A914DD9,Lun0)/HD(Part1,Sig76612470-F2F6-11DF-8002-D6217B60E588)
blk9 [0;37;40m : Acpi(HWP0002,PNP0A03,400)/Pci(1|0)/Sas(Addr5000CCA00A914DD9,Lun0)/HD(Part2,Sig766124A2-F2F6-11DF-8003-D6217B60E588)
blkA [0;37;40m : Acpi(HWP0002,PNP0A03,400)/Pci(1|0)/Sas(Addr5000CCA00A914DD9,Lun0)/HD(Part3,Sig766124C0-F2F6-11DF-8004-D6217B60E588)
I could not recognize it.
before map, following messages told that there was tape on this system:
HP 1Port 4Gb Fibre Channel Adapter (driver 1.05, firmware 4.00.070)
Scsi(Pun1,Lun0) HP C7438A ZP6B

regards
Stephen
5 REPLIES 5
DeafFrog
Valued Contributor

Re: bootable device name for tape in EFI

Hi ,

From Shell > prompt , type reconnect -r , and note the Pun and Lun number for the tape device.If the same Pun and Lun number appears in the above o/p , you will have your answer.

Regards,
FrogIsDeaf
Jayakrishnan G Naik
Trusted Contributor
Solution

Re: bootable device name for tape in EFI

Hi Stephen

I have searched some hp documents and got some info which may help you to do this.

The command reconnect -r may help you to identify your tape device

Attaching the doc that may help you here.

Thanks & Regards
Jayakrishnan G Naik
Jayakrishnan G Naik
Trusted Contributor

Re: bootable device name for tape in EFI

Hi Stephen,

Forgot to add the document in previous reply.
Adding it here.

Thanks & Regards
Jayakrishnan G Naik
Wim Rombauts
Honored Contributor

Re: bootable device name for tape in EFI

At least, in the device list you show, there is no tape drive.

I only see 2 harddisks with an EFI partition.
Your device list is :
- a USB device
- 2 partitioned disks (boot disks I presume)
- 2 nonpartitioned disks.
stephen peng
Valued Contributor

Re: bootable device name for tape in EFI

I think JGN's reply offer enough messages for me to continue.

regards
Stephen