HPE Community
Integrity Servers
1753903 Members
9911 Online
108810 Solutions
New Discussion юеВ

Re: can I band the two 1000Base-T Adapter for load balance?

 
xxl_1
Frequent Advisor

тАО04-15-2007 01:22 PM

тАО04-15-2007 01:22 PM

can I band the two 1000Base-T Adapter for load balance?


my machine is rx4640 with two 1000Base-T Adapter and is installed hpux11.23v2,I want band the two network card for load balance.

how I can do this ?

0 Kudos
Reply
3 REPLIES 3
Sandy Chen
Honored Contributor

тАО04-15-2007 01:59 PM

тАО04-15-2007 01:59 PM

Re: can I band the two 1000Base-T Adapter for load balance?

Hi,

I believe APA is the solution. It is a licensed software, please check on the following link:

http://www.hp.com/products1/serverconnectivity/adapters/apa_prodbrief.html

Regards,
Sandy
I never think of the future. It comes soon enough.
0 Kudos
Reply
Torsten.
Acclaimed Contributor

тАО04-15-2007 06:49 PM

тАО04-15-2007 06:49 PM

Re: can I band the two 1000Base-T Adapter for load balance?

Hi,

you have to purchase and use APA, see

http://docs.hp.com/en/netcom.html#Auto%20Port%20Aggregation%20%28APA%29

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
MHudec
Frequent Advisor

тАО04-16-2007 05:51 PM

тАО04-16-2007 05:51 PM

Re: can I band the two 1000Base-T Adapter for load balance?

APA, or automatic port aggregation has been already mentioned, so I would not take the wood to the woods actually, instead I am going to recommend you the book of HP-UX Certified Systems Engineer at:
http://www.amazon.co.uk/HP-Ux-CSE-Official-Reference-Professional/dp/0131463969/ref=sr_1_1/026-9176222-2466009?ie=UTF8&s=books&qid=1176789022&sr=8-1
where it is lovely covered.
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.