Integrity Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

can I band the two 1000Base-T Adapter for load balance?

 
xxl_1
Frequent Advisor

can I band the two 1000Base-T Adapter for load balance?


my machine is rx4640 with two 1000Base-T Adapter and is installed hpux11.23v2,I want band the two network card for load balance.

how I can do this ?

3 REPLIES 3
Sandy Chen
Honored Contributor

Re: can I band the two 1000Base-T Adapter for load balance?

Hi,

I believe APA is the solution. It is a licensed software, please check on the following link:

http://www.hp.com/products1/serverconnectivity/adapters/apa_prodbrief.html

Regards,
Sandy
I never think of the future. It comes soon enough.
Torsten.
Acclaimed Contributor

Re: can I band the two 1000Base-T Adapter for load balance?

Hi,

you have to purchase and use APA, see

http://docs.hp.com/en/netcom.html#Auto%20Port%20Aggregation%20%28APA%29

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
MHudec
Frequent Advisor

Re: can I band the two 1000Base-T Adapter for load balance?

APA, or automatic port aggregation has been already mentioned, so I would not take the wood to the woods actually, instead I am going to recommend you the book of HP-UX Certified Systems Engineer at:
http://www.amazon.co.uk/HP-Ux-CSE-Official-Reference-Professional/dp/0131463969/ref=sr_1_1/026-9176222-2466009?ie=UTF8&s=books&qid=1176789022&sr=8-1
where it is lovely covered.