Integrity Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

cosole configuration from server (rx6600)

 
Rajendra prasad NVR
Frequent Advisor

cosole configuration from server (rx6600)

I have root access on server model rx6600.
I need to configure iLO 2 MP LAN console.
But i don't have access to datacenter to configure directly.
But i had some guys there to connect cab to switch , but not technical.

Is there any way to access the console from server log in to configure console.

I have below method for N and L class server but not working on rx series.
3 REPLIES 3
Torsten.
Acclaimed Contributor

Re: cosole configuration from server (rx6600)

You need to boot the server and start EFI.

Then use

> conconfig

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Rajendra prasad NVR
Frequent Advisor

Re: cosole configuration from server (rx6600)

I don't have console configured at present.

My question is there any way can i configure lan console from normal login. (as root)

If i reboot i would not get EFI login at present.
Torsten.
Acclaimed Contributor

Re: cosole configuration from server (rx6600)

It's an EFI command, so you need EFI access.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!