disable telnet access to MP

[user-1221]

Hi,

I want to disable access Telnet access to MP, only allow ssh access.

Any help will be highly appreciated.

Thanks in Advance.

[Dennis Handly]

What model Integrity server do you have?

[user-1221]

Thanks for replying,

We have rx2660, rx6600 and rx7640 integrity servers.

[mits · Accepted solution]

Use the SA command. Here is an rx2660 example.

MP:CM> sa

SA

This command allows you to modify MP access configuration.

Current Set Access Configuration:
     T - Telnet        : Enabled
     W - Web SSL       : Enabled
     H - SSH           : Enabled
     I - IPMI over LAN : Enabled
     C - Command Mode  : MP Menu

Enter parameter(s) to change, A to modify All, or [Q] to Quit: t
t

For each parameter, enter:
     New value, or
     <CR> to retain the current value, or
     DEFAULT to set the default value, or
     Q to Quit

Telnet Port Access Configuration:
              D - Disabled
   Current -> E - Enabled  (default)

Enter new value, or Q to Quit: d
d

   -> Telnet Port Access Configuration will be updated

New Set Access Configuration (* modified values):
   * T - Telnet        : Disabled
     W - Web SSL       : Enabled
     H - SSH           : Enabled
     I - IPMI over LAN : Enabled
     C - Command Mode  : MP Menu

Enter Parameter(s) to revise, Y to confirm, or [Q] to Quit: y

   -> LAN Telnet users have been disconnected and logged off.

   -> Set Access Configuration has been updated.

[user-1221]

Many Thanks!