Integrity Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

disable telnet access to MP

 
SOLVED
Go to solution
user-1221
Occasional Advisor

disable telnet access to MP

Hi,

 

I want to disable access Telnet access to MP, only allow ssh access.

Any help will be highly appreciated.

 

Thanks in Advance.

user1221
4 REPLIES 4
Dennis Handly
Acclaimed Contributor

Re: disable telnet access to MP

What model Integrity server do you have?

user-1221
Occasional Advisor

Re: disable telnet access to MP

Thanks for replying,

We have rx2660, rx6600 and rx7640 integrity servers.

user1221
mits
Respected Contributor
Solution

Re: disable telnet access to MP

Use the SA command. Here is an rx2660 example.

 

MP:CM> sa


SA

This command allows you to modify MP access configuration.

Current Set Access Configuration:
     T - Telnet        : Enabled
     W - Web SSL       : Enabled
     H - SSH           : Enabled
     I - IPMI over LAN : Enabled
     C - Command Mode  : MP Menu

Enter parameter(s) to change, A to modify All, or [Q] to Quit: t
t


For each parameter, enter:
     New value, or
     <CR> to retain the current value, or
     DEFAULT to set the default value, or
     Q to Quit

Telnet Port Access Configuration:
              D - Disabled
   Current -> E - Enabled  (default)

 

Enter new value, or Q to Quit: d
d

   -> Telnet Port Access Configuration will be updated

 

New Set Access Configuration (* modified values):
   * T - Telnet        : Disabled
     W - Web SSL       : Enabled
     H - SSH           : Enabled
     I - IPMI over LAN : Enabled
     C - Command Mode  : MP Menu

 

Enter Parameter(s) to revise, Y to confirm, or [Q] to Quit: y

   -> LAN Telnet users have been disconnected and logged off.

   -> Set Access Configuration has been updated.

user-1221
Occasional Advisor

Re: disable telnet access to MP

Many Thanks!

user1221