Integrity Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

efi on rx2660 boot disk

 
SOLVED
Go to solution
wayne_104
Regular Advisor

efi on rx2660 boot disk

Hi

i have a rx2660 that had redhat linux installed on it. the original hpux boot disks were taken and stored.

I have recently taken over the site and the customer now wants the original disks again with hpux.

But when i put them in they will not boot when i do a map in efi the disks are not seen what am i missing?
4 REPLIES 4
Torsten.
Acclaimed Contributor
Solution

Re: efi on rx2660 boot disk

Do you have any hardware raid in use (configured), e.g. a P400 smartarray or the default LSI chip?

What does "map -r", "devices" and "devtree" show?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
wayne_104
Regular Advisor

Re: efi on rx2660 boot disk

Shell> map -r
Device mapping table
blk0 : Acpi(HWP0002,PNP0A03,0)/Pci(2|1)/Usb(0, 0)
blk1 : Acpi(HWP0002,PNP0A03,0)/Pci(2|0)/Usb(2, 2)


Shell> devices
C T D
T Y C I
R P F A
L E G G #P #D #C Device Name
== = = = == == == =============================================================
0D R - - - 1 7 Acpi(HWP0002,PNP0A03,0)
0E R - - - 1 3 Acpi(HWP0002,PNP0A03,200)
0F R - - - 1 2 Acpi(HWP0002,PNP0A03,300)
10 R - - - 1 1 Acpi(HWP0002,PNP0A03,600)
11 R - - - 1 2 Acpi(HWP0002,PNP0A03,700)
15 D - - 1 - - Acpi(HWP0002,PNP0A03,0)/Pci(1|0)
16 D - - 1 - - Acpi(HWP0002,PNP0A03,0)/Pci(1|1)
17 B - - 1 1 1 Acpi(HWP0002,PNP0A03,0)/Pci(1|2)
18 B - - 1 2 5 Usb Open Host Controller
19 B - - 1 2 1 Usb Open Host Controller
1A D - - 1 - - Acpi(HWP0002,PNP0A03,0)/Pci(2|2)
1B B - - 1 5 2 Acpi(HWP0002,PNP0A03,0)/Pci(3|0)
1D D X X 1 1 - LSI Logic SAS Controller
1E B X X 1 1 1 Acpi(HWP0002,PNP0A03,200)/Pci(2|0)
1F B X X 1 1 1 Acpi(HWP0002,PNP0A03,200)/Pci(2|1)
22 B X X 1 1 1 Acpi(HWP0002,PNP0A03,300)/Pci(1|0)
23 B X X 1 1 1 Acpi(HWP0002,PNP0A03,300)/Pci(1|1)
24 D - - 1 2 - Acpi(HWP0002,PNP0A03,600)/Pci(1|0)
27 D X X 1 2 - PCI-X 2.0 4Gb Fibre Channel Port (Port 1)
28 D X X 1 2 - PCI-X 2.0 4Gb Fibre Channel Port (Port 2)
38 D - - 2 - - Primary Standard Error Device
39 D - - 5 - - Primary Console Input Device
3A D - - 2 - - Primary Console Output Device
3F B - - 1 1 1 16550 Serial UART
40 B - - 1 5 3 VT-100+ Serial Console
41 B X - 1 3 1 Generic Usb Keyboard
42 B - - 1 2 1 Generic Usb Mouse
45 D - - 1 3 - Usb Bot Mass Storage
53 B X - 1 3 1 Generic Usb Keyboard
54 B - - 1 2 1 Generic Usb Mouse
55 D - - 1 3 - Usb Bot Mass Storage
57 D X X 1 3 - Intel(R) PRO/1000 MT Dual Port Server Adapter
59 D X X 1 3 - Broadcom NetXtreme Gigabit Ethernet (BCM5704)
5A D X X 1 3 - Broadcom NetXtreme Gigabit Ethernet (BCM5704)
5B D X X 1 3 - Intel(R) PRO/1000 MT Dual Port Server Adapter



Shell> devtree
Device Tree
Ctrl[04]
Ctrl[06] VenHw(SysROM)
Ctrl[0D] Acpi(HWP0002,PNP0A03,0)
Ctrl[15] Acpi(HWP0002,PNP0A03,0)/Pci(1|0)
Ctrl[16] Acpi(HWP0002,PNP0A03,0)/Pci(1|1)
Ctrl[17] Acpi(HWP0002,PNP0A03,0)/Pci(1|2)
Ctrl[3F] 16550 Serial UART
Ctrl[40] VT-100+ Serial Console
Ctrl[39] Primary Console Input Device
Ctrl[3A] Primary Console Output Device
Ctrl[38] Primary Standard Error Device
Ctrl[18] Usb Open Host Controller
Ctrl[41] Generic Usb Keyboard
Ctrl[39] Primary Console Input Device
Ctrl[42] Generic Usb Mouse
Ctrl[39] Primary Console Input Device
Ctrl[53] Generic Usb Keyboard
Ctrl[39] Primary Console Input Device
Ctrl[54] Generic Usb Mouse
Ctrl[39] Primary Console Input Device
Ctrl[55] Usb Bot Mass Storage
Ctrl[19] Usb Open Host Controller
Ctrl[45] Usb Bot Mass Storage
Ctrl[1A] Acpi(HWP0002,PNP0A03,0)/Pci(2|2)
Ctrl[1B] Acpi(HWP0002,PNP0A03,0)/Pci(3|0)
Ctrl[3A] Primary Console Output Device
Ctrl[38] Primary Standard Error Device
Ctrl[0E] Acpi(HWP0002,PNP0A03,200)
Ctrl[1D] LSI Logic SAS Controller
Ctrl[1E] Acpi(HWP0002,PNP0A03,200)/Pci(2|0)
Ctrl[59] Broadcom NetXtreme Gigabit Ethernet (BCM5704)
Ctrl[1F] Acpi(HWP0002,PNP0A03,200)/Pci(2|1)
Ctrl[5A] Broadcom NetXtreme Gigabit Ethernet (BCM5704)
Ctrl[0F] Acpi(HWP0002,PNP0A03,300)
Ctrl[22] Acpi(HWP0002,PNP0A03,300)/Pci(1|0)
Ctrl[57] Intel(R) PRO/1000 MT Dual Port Server Adapter
Ctrl[23] Acpi(HWP0002,PNP0A03,300)/Pci(1|1)
Ctrl[5B] Intel(R) PRO/1000 MT Dual Port Server Adapter
Ctrl[10] Acpi(HWP0002,PNP0A03,600)
Ctrl[24] Acpi(HWP0002,PNP0A03,600)/Pci(1|0)
Ctrl[11] Acpi(HWP0002,PNP0A03,700)
Ctrl[27] PCI-X 2.0 4Gb Fibre Channel Port (Port 1)
Ctrl[28] PCI-X 2.0 4Gb Fibre Channel Port (Port 2)
Ctrl[56] VenHw(D65A6B8C-71E5-4DF0-A909-F0D2992B5AA9)
Ctrl[58] Acpi(HWP0002,PNP0A03,200)/Pci(1|0)/Ctrl(0)
Torsten.
Acclaimed Contributor

Re: efi on rx2660 boot disk

There are no disks at all.

Maybe there was a hardware RAID configured and it is now inactive. Go into the LSI controllers bios and check.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
wayne_104
Regular Advisor

Re: efi on rx2660 boot disk

YOU HIT IT RIGHT ON THE HEAD THANKS