cancel
Showing results for 
Search instead for 
Did you mean: 

firmware update

 
christian_derek
Regular Advisor

firmware update

Hi,

I'm trying to install the firmware update release notice - v4.1 on a itanium rx7620. I was able to complete the pdhc installation, but I'm getting an error "Failed to burn FPGA CIO 1" when I try to install the matcio_2.10.0.osp. I'm getting ...

Ftp connection sucessful
Processing ...Done!
**** Failed to burn FPGA CIO 1 ****

Thanks,
5 REPLIES 5
christian_derek
Regular Advisor

Re: firmware update

Hi,

There is more info at the console the system is saying ...

Processing..Error at XSVF command #9
XSVF ERROR#2

Thansk,
Luk Vandenbussche
Honored Contributor

Re: firmware update

Hi,

I advise you to contact HP for this type off error.
Sameer_Nirmal
Honored Contributor

Re: firmware update

There is a problem to update the firmware of Core IO 1.

From which version you are upgrading from?
What you see in MP -> CM -> SYSREV ?
Which FTP server you are using?

Verify the .osp file with its checksum.
Check for any error in MP -> SL

However, your best approch would be contact HP support.

christian_derek
Regular Advisor

Re: firmware update

It's ok now, thank you. I forgot to put the 48volts power back.
christian_derek
Regular Advisor

Re: firmware update

I forgot to put the power back.

Thanks,