Integrity Servers
1748144 Members
3582 Online
108758 Solutions
New Discussion юеВ

get password from MP (Management Processor)

 
SOLVED
Go to solution
Gregory Locke
Frequent Advisor

get password from MP (Management Processor)

The MP password of our Itanium was set up by another admin. Short of resetting the MP to its defaults, is there any other way to reset it's password directly or through a terminal session on the server itself?
3 REPLIES 3
Torsten.
Acclaimed Contributor
Solution

Re: get password from MP (Management Processor)

Hi,

see this thread:

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=1131336

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Torsten.
Acclaimed Contributor

Re: get password from MP (Management Processor)

Same question:
Did you use the command or the reset button?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Gregory Locke
Frequent Advisor

Re: get password from MP (Management Processor)

thanks for the help