Integrity Servers
1748274 Members
4200 Online
108760 Solutions
New Discussion

how to access efi AND iLO on hp integrity rx7460

 
Claidy
Occasional Contributor

how to access efi AND iLO on hp integrity rx7460

Hello I'm on a hp integrity rx7460 ( I know it's a old machin).

My goal is to prepare this server for a customer. I mean installing HP-UX 11 v3, configure auto boot after power failure.

the drama: with my laptop I can access MP via the MP LAN port, But I'm not finding the way to acces the EFI and proceeed to the OS installation.

Is there somebody who can help me? I thought ther was a way to procced to OS installation though the MP.

Please I really need help.

 

1 REPLY 1
Torsten.
Acclaimed Contributor

Re: how to access efi AND iLO on hp integrity rx7460

>> with my laptop I can access MP via the MP LAN port,

 

Per telnet/ssh?

Boot the system and select CO from MP menu.

If the EFI Boot Manager appears, it should automatically boot and install media, but you can stop autoboot here, select built-in EFI shell and boot from there.

 

EFI Boot Manager ver 1.10 [14.61] Please select a boot option
OS might use only the primary console set via boot manager or conconfig command


HP-UX Primary Boot: 0/0/0/2/0.6.0 HP-UX

HA Alternate Boot: 0/0/0/3/0.6.0 HP-UX

Alternate Boot: 0/0/0/3/0.6.0

EFI Shell [Built-in] Acpi(HWP0002,0)/Pci(1|0)/Mac(00127995552B)

Boot Option Maintenance Menu

Use ^ and v to change option(s). Use Enter to select an optionUse > and < to view long descriptionsHot Key: 'S' or 's' to start the EFI ShellBoot Option Maintenance Menu

Selected boot option: EFI Shell [Built-in]


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!