Integrity Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

how to reset MP password of rx4640 server

 
Sumit Ghosal
Frequent Advisor

how to reset MP password of rx4640 server

Hi All,

I got a hp rx4640 server, the problem is that, MP password is lost. default passwd - Admin/Admin is not working. Is there any way to reset the MP password to factory defaults??

Thanks
Sumit
4 REPLIES 4
Torsten.
Acclaimed Contributor

Re: how to reset MP password of rx4640 server

Hi,

first connect to the (serial) console.

Now execute
stty +resetGSP
There will be a message on the console, asking you to press "p" to reset the passwords. This method was perfectly working on older models, so I guess it is working for this box too.
Another way to achive this is pressing the "reset" button at the back behind the chassis (left side) for some seconds.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Sumit Ghosal
Frequent Advisor

Re: how to reset MP password of rx4640 server

thanks!! it worked. :-)
Sumit Ghosal
Frequent Advisor

Re: how to reset MP password of rx4640 server

thanks it worked
Torsten.
Acclaimed Contributor

Re: how to reset MP password of rx4640 server

The command or the reset button?

Please take some time and read this:

http://forums1.itrc.hp.com/service/forums/helptips.do?#33

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!