Integrity Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

hpux first install panic on BL860c

 
CSP_ALGERIA
Frequent Advisor

hpux first install panic on BL860c

Hello,

Following the steps in the user guide installation we tried to install a new BL860c with hpux V2 with no result.

By using DVD driver with USB connection or by using virtual media with ISO file.

The installation begin normally and after few time the server crash with a panic error :
A system crash has occurred. (See the above messages for details.)
*** The system is now preparing to dump physical memory to disk, for use
*** in debugging the crash.

ERROR: Your system crashed before I/O and dump configuration was complete.
This system does not support a crash dump under these circumstances.
Contact your HP support representative for assistance.

Any one can help.

Thanks and best regards

Omar
Nothing in the world can take the place of persistence.
5 REPLIES 5
Robert-Jan Goossens_1
Honored Contributor

Re: hpux first install panic on BL860c

Hi Omar,

I believe you need at least HP-UX 11i Version 2 June 2007 or higher to have support on the BL860c. Could you check the version of your install media?

Regards,
Robert-Jan
Torsten.
Acclaimed Contributor

Re: hpux first install panic on BL860c

Check the install media release date (see post above) and check the firmware, see also

http://docs.hp.com/en/12686/USBUnclaimedDeviceonHPUX11iv2and11iv3SystemswithiLO.pdf

http://docs.hp.com/en/AD217-9013A/AD217-9013A.pdf

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
CSP_ALGERIA
Frequent Advisor

Re: hpux first install panic on BL860c

hello Robert,

first Many thanks for you feedback !

we have HP-UX 11i Version 2 June 2008.

Best regards

Omar
Nothing in the world can take the place of persistence.
CSP_ALGERIA
Frequent Advisor

Re: hpux first install panic on BL860c

Hello Robert & Thorsten.

Finally, the installation was done.
The problem was with the USB DVD connected to the BL860c (not an HP DVD ROM).

We have mapped an HP lab top DVD as virtual media and it work finely.

Also, when mapping a directory with an ISO file in, doesnâ t work.

Hope this will help others next.

Many thanks for your participation!

Best regards.
Omar
Nothing in the world can take the place of persistence.
CSP_ALGERIA
Frequent Advisor

Re: hpux first install panic on BL860c

the problem was with the external usb DVD !
Nothing in the world can take the place of persistence.