Integrity Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

looking for Managing Superdome Complex Guide for INTEGRITY platform

 
SOLVED
Go to solution
Hanry Zhou
Super Advisor

looking for Managing Superdome Complex Guide for INTEGRITY platform

I only found such document for PA-RISC superdome as following:
http://docs.hp.com/en/B2355-90702/B2355-90702.pdf

where is the corresponding doc for Integrity superdome? If there isn't any, where I can start with?
none
4 REPLIES 4
sujit kumar singh
Honored Contributor

Re: looking for Managing Superdome Complex Guide for INTEGRITY platform

Hello Henry,


you can have a look at the following Link that ca be helpful.

This is the Users Guide for the HP9000 Integrity Superdome.


http://docs.hp.com/en/A5201-96044/index.html


Regards
Sujit
Torsten.
Acclaimed Contributor
Solution

Re: looking for Managing Superdome Complex Guide for INTEGRITY platform

Hi Hanry,

all about the sx1000 Superdome:

http://docs.hp.com/en/hw.html#HP%20Integrity%20Superdome%20Server

and sx2000 Superdome:

http://docs.hp.com/en/hw.html#HP%20Integrity%20Superdome/sx2000

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
sujit kumar singh
Honored Contributor

Re: looking for Managing Superdome Complex Guide for INTEGRITY platform

Hi Henry,


also if what is reqd is the NPAR Operations also can have a look at the NPAR Config guide.

That also is a good documentation.

But NPAR operation is just a subset of the SD Operations.


http://docs.hp.com/en/5992-0928/npartition.pdf



REgards
Sujit
Torsten.
Acclaimed Contributor

Re: looking for Managing Superdome Complex Guide for INTEGRITY platform

Depending on what you want to "manage" there are so many possibilities, e.g.

http://h18013.www1.hp.com/products/servers/management/hpsim/index.html

http://h18013.www1.hp.com/products/servers/management/agents/index.html

You can even work with nPar commands remotely, see also

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=1844080&prodTypeId=15351&prodSeriesId=1844079&swLang=13&taskId=135&swEnvOID=1060#93211

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!