Integrity Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

nPar creation in rx7620. Partition 1 doesnot not show disks

 
SOLVED
Go to solution
Makesh Annamalai
Frequent Advisor

nPar creation in rx7620. Partition 1 doesnot not show disks

Hi All,

I have created Partition 1 from Partition 0. When i boot the nPAr1 it doesnot show any Disks.

Pls find the output & do the needful

Welcome to EFI 1.1!
EFI version 1.10 [14.61] Running on GenuineIntel Itanium(R) 2 Processor
EFI server rx7620 SAL [12:02:08] - HP
Loading 'ULTRA160_SCSI'...
driver: Image ULTRA160_SCSI loaded at 40FF9BE000-40FF9FE000. Returned Success
Loading 'BRM5701_LAN'...

Copyright (c) 2000-2005 Broadcom Corporation
Broadcom NetXtreme Gigabit Ethernet EFI driver v7.0.11

driver: Image BRM5701_LAN loaded at 40FFA44000-40FFA7E000. Returned Success
Loading 'FPSWA'...
driver: Image FPSWA loaded at 40FF954000-40FF9BE000. Returned Success
Scsi(Pun6,Lun0) HP 146 GMAW3147NC HPC1 (160 MBytes/sec)
Scsi(Pun2,Lun0) _NEC DVD_RW ND-3550A 1.31
Scsi(Pun6,Lun0) HP 146 GMAW3147NC HPC1 (160 MBytes/sec)
HP Gigabit Ethernet Adapter is detected (PCI)
POSSE Library is loading...
EFI Shell version 1.10 [14.61]
Device mapping table
blk0 : Acpi(HWP0002,100)/Pci(3|0)/Scsi(Pun6,Lun0)
blk1 : Acpi(HWP0002,100)/Pci(3|1)/Scsi(Pun2,Lun0)
blk2 : Acpi(HWP0002,11C)/Pci(1|0)/Pci(1|1)/Scsi(Pun6,Lun0)


[] MP> co

Partitions available:

Part# Name
----- ----
0) Partition 0
1) Partition 1
Q) Quit

Please select partition number:


--------------

# parstatus
Note: No action specified. Default behavior is display all.
[Complex]
Complex Name : Complex 01
Complex Capacity
Compute Cabinet (2 cell capable) : 1
Active MP Location : cabinet 0
Original Product Name : server rx7620
Original Serial Number : USE462114F
Current Product Order Number : AB204A
OEM Manufacturer :
Complex Profile Revision : 1.0
The total number of partitions present : 2
GSM sharing : Disabled Complex-wide


[Cabinet]
Cabinet I/O Bulk Power Backplane
Blowers Fans Supplies Power Boards
OK/ OK/ OK/ OK/
Cab Failed/ Failed/ Failed/ Failed/
Num Cabinet Type N Status N Status N Status N Status MP
=== ============ ========= ========= ========== ============ ======
0 2 cell slot 4/0/N+ 6/0/N+ 2/0/N - Active

Notes: N+ = There are one or more spare items (fans/power supplies).
N = The number of items meets but does not exceed the need.
N- = There are insufficient items to meet the need.
? = The adequacy of the cooling system/power supplies is unknown.
HO = Housekeeping only; The power is in a standby state.
NA = Not Applicable.


[Cell]
CPU Memory Use
OK/ (GB) Core On
Hardware Actual Deconf/ OK/ Cell Next Par
Location Usage Max Deconf Connected To Capable Boot Num
========== ============ ======= ========= =================== ======= ==== ===
cab0,cell0 Active Core 4/0/4 32.0/0.0 cab0,bay0,chassis0 yes yes 0
cab0,cell1 Active Core 4/0/4 32.0/0.0 cab0,bay0,chassis1 yes yes 1

Notes: * = Cell has no interleaved memory.


[Chassis]
Core Connected Par
Hardware Location Usage IO To Num
=================== ============ ==== ========== ===
cab0,bay0,chassis0 Active yes cab0,cell0 0
cab0,bay0,chassis1 Active yes cab0,cell1 1


[Partition]
Par # of # of I/O
Num Status Cells Chassis Core cell Partition Name (first 30 chars)
=== ============ ===== ======== ========== ===============================
0 Active 1 1 cab0,cell0 Partition 0
1 Active 1 1 cab0,cell1 Partition 1
#

------------------

7 REPLIES 7
Torsten.
Acclaimed Contributor

Re: nPar creation in rx7620. Partition 1 doesnot not show disks

But there are 2 146GB disks and a DVD drive:

Scsi(Pun6,Lun0) HP 146 GMAW3147NC HPC1 (160 MBytes/sec)
Scsi(Pun2,Lun0) _NEC DVD_RW ND-3550A 1.31
Scsi(Pun6,Lun0) HP 146 GMAW3147NC HPC1 (160 MBytes/sec)



Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Makesh Annamalai
Frequent Advisor

Re: nPar creation in rx7620. Partition 1 doesnot not show disks

While it boots it shows...but when u do the MAP it doesnot show any fs0 devices

Makesh Annamalai
Frequent Advisor

Re: nPar creation in rx7620. Partition 1 doesnot not show disks

Shell> map -r
Device mapping table
blk0 : Acpi(HWP0002,100)/Pci(3|0)/Scsi(Pun6,Lun0)
blk1 : Acpi(HWP0002,100)/Pci(3|1)/Scsi(Pun2,Lun0)
Shell> : Acpi(HWP0002,11C)/Pci(1|0)/Pci(1|1)/Scsi(Pun6,Lun0)

Torsten.
Acclaimed Contributor

Re: nPar creation in rx7620. Partition 1 doesnot not show disks

This is normal as long as you don't have an OS installed.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Makesh Annamalai
Frequent Advisor

Re: nPar creation in rx7620. Partition 1 doesnot not show disks

When i try to do the installation thru Ignite..It throws the below error

Shell> lanboot select
01 Acpi(HWP0002,11C)/Pci(1|0)/Pci(4|0)/Mac(0017084CB8CC)
Select Desired LAN: 1 .

LAN Configuration:: 00 17 08 4C B8 CC .|
Client MAC Address : 00 17 08 4C B8 CC
Client IP Address : 9.124.114.178
NO Gateway found
Subnet Mask : 0.255.255.255
Boot Server IP Address : 9.124.114.95
DHCP Server IP Address : 9.124.114.95

Retrieving File Size

Boot file name: /opt/ignite/boot/nbp.efi
Boot file size: 0 bytes

PXE-E16: Valid PXE offer not received.

Pls do the needful
Torsten.
Acclaimed Contributor
Solution

Re: nPar creation in rx7620. Partition 1 doesnot not show disks

You should check the config again, for example your subnet mask is wrong.

You may also consider to use "dbprofile" to boot your client.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Makesh Annamalai
Frequent Advisor

Re: nPar creation in rx7620. Partition 1 doesnot not show disks

Thanks...After changing the ip . i'm able to boot thru ignite