need part no of hdd?

[fizan]

How to verify the part no of the internal HDD in the hp-server rx-2660 ?

[Steven E. Protter]

Shalom,

see http://partsurfer.hp.com

SEP

[fizan]

where to enter the serial no,

[SoorajCleris]

Hi,

Not the serial number, Enter the part number, which you can see under the serial number.

"p/n"

Regards,
Sooraj

[fizan]

there is nothing like that here

[Torsten.]

From partsurfer:

http://partsurfer.hp.com/Search.aspx?type=PROD&SearchText=AD245A

376596-001 36.0GB hot-plug Serial Attached SCSI (SAS) hard drive - 10,000 RPM, 2.5-inch small form factor (SFF)

376597-001 72.0GB hot-plug Serial Attached SCSI (SAS) hard drive - 10,000 RPM, single-port, 2.5-inch small form factor (SFF)

432320-001 146.0GB hot-plug Serial Attached SCSI (SAS) hard drive - 10,000 RPM, 2.5-inch form factor

[Kranti Mahmud]

Hi Fizan,

36-GB 10K RPM SAS (Serial Attached SCSI) 2.5" Small Form Factor Hot Plug Disk
AD140A

36-GB 15K RPM SAS (Serial Attached SCSI) 2.5" Small Form Factor Hot Plug Disk
AD378A

72-GB 10K RPM SAS (Serial Attached SCSI) 2.5" Small Form Factor Hot Plug Disk
AD141A

72-GB 15K RPM SAS (Serial Attached SCSI) 2.5" Small Form Factor Hot Plug Disk
AD379A

146-GB 10K RPM SAS (Serial Attached SCSI) 2.5" Small Form Factor Hot Plug Disk
AD333A

Ref: http://www.spectra.com/pdfs/rx2660.pdf

Rgds-Kranti

[Robert_Jewell]

Do you want to find out what part you have installed in the system?

With an rx2660 you are either running off the internal SAS controller:
# sasmgr get_info -D /dev/sasd0 -q lun=all -q lun_locate

You could also be using a P400 RAID controller in which the command is different:

# sautil /dev/ciss0

(assuming sasd0 and ciss0 are your controller device files).

With these commands you will find info regarding the hard drive including the model.

You can then determine the size and details of the drive to use partsurfer to determine the HP P/N.

-Bob