1753316 Members
5252 Online
108792 Solutions
New Discussion юеВ

Re: npar on blade

 
SOLVED
Go to solution
aaaA_4
Regular Advisor

npar on blade

Hi,
is it possible to create npars in BL860C i2 blade?
Thanks,
n.
4 REPLIES 4
Torsten.
Acclaimed Contributor
Solution

Re: npar on blade

According to all I know so far it is not supported and currently not planned.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Zygmunt Krawczyk
Honored Contributor

Re: npar on blade

nPars are planned for BL870c i2 (max 2 nPars) and for BL890c i2 (max 4 nPars). Currently nPars for these blades are not supported, and I hope it will be supported by the end 2011.
Torsten.
Acclaimed Contributor

Re: npar on blade

Sounds like good news.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
S_Logan
HPE Pro

Re: npar on blade

Hi As far as I know, The Integrity Blades are equivelent to Entry Level Server with enhanced mangemnt features.

Teh Cell-Blade based concept with npar available in Superdome2.

In Integrity Blade ,If The nPar concept is available in future, good one to have!

HTH
I work for HPE

Accept or Kudo


[Any personal opinions expressed are mine, and not official statements on behalf of Hewlett Packard Enterprise]