p410i RAID LUN create wont work on rx2800

[bigdaddy68]

Hi,

Well I got 'saupdate' to enable my p410i RAID controller on rx2800 from HBA mode to RAID mode.
( i did it from a USB key..)

I can see my p410i from UEFI shell 'devices' cmd:

Shell> devices
C T D
T Y C I
R P F A
L E G G #P #D #C Device Name
== = = = == == == =============================================================
.
98 D X X 1 2 - Smart Array P410i Controller
.

Shell> drvcfg
Configurable Components
Drv[A1] Ctrl[9F] Lang[eng]
Drv[A1] Ctrl[A2] Lang[eng]
Drv[C2] Ctrl[C0] Lang[eng]
Drv[C5] Ctrl[C3] Lang[eng]
Drv[C9] Ctrl[C7] Lang[eng]
Drv[CC] Ctrl[CA] Lang[eng]
Drv[9A] Ctrl[98] Lang[eng] <== here it is

Shell> drvcfg -s 9a 98

while in ORCA i try to create Logical Drives(LUNs) and I can't - nothing I do ever takes after I hit F8 ???

what is all this about license keys anyway ?
Do I actually need license keys to create a LUN on my rx2800 ???? where do i get those ?

thx
bigdaddy68

[bigdaddy68]

damnit anyway that friggin terminal server was hacking up my F8 key :(

ESC-8 worked and I can create LUNs

time to use iLO RSC Remote Serial console ..

sorry to pull the fire alarm
bigdaddy68

[bigdaddy68]

Make sure you're method of serial port access (term svr or serial concentrator) properly communicates Function Key ESC sequences to ORCA ....

ORCA probably wants to see "Supported Terminal Types": hpterm, VT100, VT100+ and VT-UTF8

Use of iLO Remote Serial Console will help ensure this