parstatus

[David Willams]

CPU Memory Use
OK/ (GB) Core On
Hardware Actual Deconf/ OK/ Cell Next Par
Location Usage Max Deconf Connected To Capable Boot Num
========== ============ ======= ========= =================== ======= ==== ===
cab0,cell0 Active Base 2/0/4 16.0/0.0 cab0,bay0,chassis0 yes yes 0
cab0,cell1 Active Core 2/0/4 16.0/0.0 cab0,bay0,chassis1 yes yes 0

But I have only 1 partation available

Partitions available:

# Name
--- ----
0) Partition 0
Q) Quit

I do not see Partition 1

[Steven E. Protter · Accepted solution]

Shalom,

Perhaps Partition 1 not configured?

SEP

[David Willams]

how to configure the other cell board...

i have 2 cpu's in each of these cell boards..

Type : N/A
Speed : 1600 MHz
CPU Status
=== ======
0 OK
1 Absent
2 Absent
3 Absent
4 OK
5 Absent
6 Absent
7 Absent

CPUs
===========
OK : 2
Deconf : 0
Max : 4

If I create a hpvm guest here...Is it required to configure the other cell board as well or not... how may vcpus(max) can I assign to it and how much memory(max in GB) can I assign to it

[melvyn burnard]

Well you only have 2 cells, and they are both in partition 0....
cab0,cell0 Active Base 2/0/4 16.0/0.0 cab0,bay0,chassis0 yes yes 0 <--
cab0,cell1 Active Core 2/0/4 16.0/0.0 cab0,bay0,chassis1 yes yes 0 <--

[Steven E. Protter]

Shalom,

I do not see any information posted at this time with amount of memory installed on the cells.

No do I see cpu information.

Let us see some information otherwise its crystal ball time.

ioscan -f
dmesg

SEP

[Torsten.]

The last column is telling you both cells are part of this single partition.
No need to worry.

A full listing of "parstatus" will tell you more details.

[sen_ux]

You can create a with existing resources.
You can have 2 vCpus and memory as per the availability.