Integrity Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

problem to install windows on HP rx2660

 
mmprathibha
Occasional Advisor

problem to install windows on HP rx2660

trying to make rx2660 dual boot, Have installed the hpux and then trying to install the windows.
starts booting through the DVD and then asks for the disk driver so downloaded the driver and tried installing, soon after selecting the 3rd party installation options gives an error that setup.oem does not exist.
how can I proceed installing windows on it.

and attaching ioscan and sasutil command output

# ioscan -fnd sasd

Class I H/W Path Driver S/W State H/W Type Description

====================================================================

escsi_ctlr 0 0/1/1/0 sasd CLAIMED INTERFACE HP PCI/PCI-X SAS MPT Adapter

/dev/sasd0



# sautil /dev/sasd0 stat



******************************************************************************

**** ****

**** S A U T I L S u p p o r t U t i l i t y ****

**** ****

**** for the HP SmartArray RAID Controller Family ****

**** ****

**** version A.02.12 ****

**** ****

**** (C) Copyright 2003-2007 Hewlett-Packard Development Company, L.P. ****

******************************************************************************





sautil (/dev/sasd0): Error - IOCTL failed (GET_DRIVER_API_VERSION)

sautil (/dev/sasd0): Invalid argument, errno=22
2 REPLIES 2
TTr
Honored Contributor

Re: problem to install windows on HP rx2660

What windows media are you using to install? Check if you have the latest firmware on the EFI and the SA.
mits
Respected Contributor

Re: problem to install windows on HP rx2660

SAUTIL is available for the Smart Array controllers like SA640x, P400 or P800. Your device file is assigned for the 8 port SAS controller. So you can use sasmgr to get the status or information. i.e.:

# sasmgr get_stat -D /dev/sasd0

Tue Nov 4 19:53:19 2008

General HBA statistics
No. of times HBA came online : 1
Time at which HBA went to online state : Tue Nov 4 10:15:45
No. of times HBA went offline : 0
Time at which HBA went to offline state : N/A
No. of times HBA went to transient state : 1
Time at which HBA went to transient state : Tue Nov 4 10:15:29
No. of times enable was issued by ioctl : 0
No. of times disable was issued by ioctl : 0
No. of times reset was issued by ioctl : 0