Integrity Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

problem with mp port rx8640

 
SOLVED
Go to solution
pedliz11
Frequent Advisor

problem with mp port rx8640

we had a problem with an mp port --could not access via ip or serial connection.. We had to power down the whole server with all of it's vpars to reset this port.. Is there any firmware upgrades that fix this? and or patches? pl let me know n Thanks for your help
5 REPLIES 5
Jeeshan
Honored Contributor

Re: problem with mp port rx8640

just power up the server. not to start server. then try to connect to MP with serial cable.
a warrior never quits
pedliz11
Frequent Advisor

Re: problem with mp port rx8640

tried that did not work
Steven E. Protter
Exalted Contributor
Solution

Re: problem with mp port rx8640

Shalom,

http://h20000.www2.hp.com/bizsupport/TechSupport/ProductRoot.jsp?lang=en&cc=il&taskId=135

If there is firmware for your box it should be installed regardless of this problem.

I suspect the MP port is dead. Hardware issue. Contact HP support for replacement. these things do happen once in a while.

SEP
Steven E Protter
Owner of ISN Corporation
http://isnamerica.com
http://hpuxconsulting.com
Sponsor: http://hpux.ws
Twitter: http://twitter.com/hpuxlinux
Founder http://newdatacloud.com
Jacques Carriere
Regular Advisor

Re: problem with mp port rx8640

Any green lights on the MP adapter? If not, you may have a problem.

The following command might help...

#stty +resetGSP

Jacques
pedliz11
Frequent Advisor

Re: problem with mp port rx8640

everything worked