Integrity Servers
1748161 Members
3803 Online
108758 Solutions
New Discussion юеВ

Re: procedure to configure raid5 in rx2620

 
akshitshah
Advisor

procedure to configure raid5 in rx2620

i have rx2620 server attached with msa30. i have configure raid5 in msa30. so please reply me step by step procedure.
4 REPLIES 4
rick jones
Honored Contributor

Re: procedure to configure raid5 in rx2620

Is your rx2620 accessing the MSA30 via a HW RAID controller? If not, does the (unstated) operating system you are running offer software RAID 5 support? In the case of the former, the documentation for the RAID controller should describe how to setup RAID 5. In the case of the latter, the documentation for the operating system should.
there is no rest for the wicked yet the virtuous have no pillows
hvhari
Esteemed Contributor

Re: procedure to configure raid5 in rx2620

if you have smart array controller installed on the system and MSA is connected to that controller, RAID 5 can be configured. What is the configuration of your system ?
Regards,
Hari

If this post was useful , click the Kudos Star on the left side to say Thanks!
Torsten.
Acclaimed Contributor

Re: procedure to configure raid5 in rx2620

IMHO you already have all you need!


http://h30499.www3.hp.com/t5/Disk-Array/how-to-configure-raid5-with-hot-spare-for-MSA-30-in-HP-UX-server/m-p/5275475#M44607


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
akshitshah
Advisor

Re: procedure to configure raid5 in rx2620

thanx a lot all