Integrity Servers
1748181 Members
3733 Online
108759 Solutions
New Discussion

"HP Integrity Management Pack for Operations Manager 2007" for Windows 2008 R2

 
AFrolovs
Visitor

"HP Integrity Management Pack for Operations Manager 2007" for Windows 2008 R2

Hello!

 

Is it version of „HP Integrity Management Pack for Operations Manager 2007” available, that supports Microsoft Windows Server 2008 R2 Itanium Edition”?

 

The only version I have found is 1.0.33.0 (16 May 2007) for Microsoft Windows Server 2003 64-Bit Edition.

4 REPLIES 4
S_Logan
HPE Pro

Re: "HP Integrity Management Pack for Operations Manager 2007" for Windows 2008 R2

Hi AFrolovs,

 

Please refer these links:

 

Operations Manager 2007 R2 Supported Configurations:
http://technet.microsoft.com/en-us/library/bb309428.aspx
 
Note: 
Operations Manager 2007 SP1 is supported on Windows Server 2008. Both Windows Server 2008 and Operations Manager 2007 SP1 hotfixes are required. Official supported scenarios with the required hotfixes can be found at: http://go.microsoft.com/fwlink/?LinkId=119299. Operations Manager 2007 R2 is supported on Windows Server 2008, no hotfixes are required.
 
 
HTH
Surendar
----------------------
How to assign KUDOS? Click the STAR!
I work for HPE

Accept or Kudo


[Any personal opinions expressed are mine, and not official statements on behalf of Hewlett Packard Enterprise]
AFrolovs
Visitor

Re: "HP Integrity Management Pack for Operations Manager 2007" for Windows 2008 R2

Thank you for replay.

 

I understand Microsoft Operations Manager 2007 R2 supported configurations and requirements.

My worry is about “HP Integrity Management Pack for Operations Manager 2007” version (http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=322822&prodNameId=322820&swEnvOID=1060&swLang=13&mode=2&taskId=135&swItem=is-51063-1).  “HP Integrity Management Pack” released on 16 May 2007 (Windows Server 2008 R2 retail availability was September 14, 2009). HP released several new versions of management packs for Proliant servers and BladeSystems (current version is 2.0 as part of “HP Insight Control for Microsoft System Center 6.3” http://h18013.www1.hp.com/products/servers/management/fpdownload.html). But there are no any new versions for “HP Integrity Management Pack” since May 2007.

 

I have customer with Integrity servers running Windows Server 2008 R2 Itanium Edition. I plan to configure Microsoft Operations Manager 2007 R2 to use “HP Insight Control for Microsoft System Center 6.3” to monitor Proliant servers and BladeSystems. But I cannot find any information about “HP Integrity Management Pack for Operations Manager 2007” support with Windows Server 2008 R2.

S_Logan
HPE Pro

Re: "HP Integrity Management Pack for Operations Manager 2007" for Windows 2008 R2

Hi AFrolovs,

 

I could not see any newer version as you mentioned about  OM2007.

could you please visit this link and see any other solution available for your requirement:

http://www.hp.com/servers/integration 

 

HTH

Surendar

I work for HPE

Accept or Kudo


[Any personal opinions expressed are mine, and not official statements on behalf of Hewlett Packard Enterprise]
AFrolovs
Visitor

Re: "HP Integrity Management Pack for Operations Manager 2007" for Windows 2008 R2

There is no HP Integrity MP at all.

 

I cannot find any other version on HP Web.