Integrity Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

"Launching /stand/vmunix" freezes

 
SOLVED
Go to solution
MazenH
Occasional Visitor

Re: "Launching /stand/vmunix" freezes

Hi!

 

I am facing the same problem.

 

I tried the conconfig 2 primary. And now all my display is on 'COM' port (serial)

 

I am working on RX1620 machine.

I need to make the display the same on both the MP LAN and the serial connection (as I am familiar to on the the RX and RP servers I worked on before, 4000 series)

 

But as I see, I only have to chose between one of them to show me the output of CO.

 

Is there any way I can have this on this machine?

 

Also, I have another weird problem: In my serial console connection, I cannot see the MP page, it's directly in the CO output, and when I try to CTRL+B, it doesn't do anything. I have tried it on a new board also, same thing!

However, I can connect normally via the DB25 (console/UPS/remote) serial port.

Any help in these issues would be appreciated. :)

 

Thank you! 

Torsten.
Acclaimed Contributor

Re: "Launching /stand/vmunix" freezes

The 25 pin serial connector with a "M" or "W" cable provides MP console, UPS and modem connectors.

This is what you need to use.

The 9pin serial connector below can provide console, but it is not a part of the MP - hence no MP access!

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Highlighted
shaydon
Occasional Visitor

Re: "Launching /stand/vmunix" freezes

Thanks heaps for this - an oldie but a goodie, caught us out today :)

Krrish47
Occasional Visitor

Re: "Launching /stand/vmunix" freezes

well, when you are at below stage, just interrupt and type  "boot vmunix -vga"  .. no need to go through all menus

Press Any Key to interrupt Autoboot
\EFI\HPUX\AUTO ==> boot vmunix
Seconds left till autoboot - 9