HPE Community
Integrity Servers
1752608 Members
4262 Online
108788 Solutions
New Discussion

Re: raid controller on rx6600

 
SOLVED
Go to solution
Jeeshan
Honored Contributor

‎12-05-2008 10:44 PM

‎12-05-2008 10:44 PM

Re: raid controller on rx6600

sorry 'bout dat. It was sasmanager.
a warrior never quits
0 Kudos
Reply
Torsten.
Acclaimed Contributor

‎12-06-2008 10:32 AM

‎12-06-2008 10:32 AM

Solution

Re: raid controller on rx6600

If this command

sautil /dev/ciss1

returns with information, you have a smartarray controller.

try

# saconfig /dev/ciss1

too.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.